Suspension/Handling/Braking
5,114
Total Topics
25
Showing
32
Page 32 of 205
Topics in Suspension/Handling/Braking •
newest topics first
i know there is alot available but alot of 7th gen stuff has better prices so ijust wanted to know of any compatible parts that i could use....
_
This post has been edited by
playr158
: Dec 7, 2011 - 3:00 PM...
diagnosing abs is a BIIIAAATCH!!!! ive been fighting with mine for a while now, finnaly got it down to all 4 abs sensors are done, the fronts were bro...
15" steelies from tire rack seems a good fit but sold out!
15x6
+33mm offset
4.8" backspacing
I'd use 185 60 snow tires with that....
Bad part about that is... in my City(State even) do I have a dealership that stocks parts for anything past 2000 and probably 2005. so I have to wait ...
i had this exact same thing happen to me when i first got my celica. i hadn't changed anything yet, so i dont think it would be the rims. check the pa...
Did you change both axles?? I know the noise I'm getting (almost close to what you might be hearing) is my bad axles and bad ball joints with the tire...
Can anyone help me! ( I have been told I'm beyond help ) Looking for information on a front upper strut tower brace, I remember reading about a brace ...
#9 is the return low pressure hose. its the easiest to replace....
Just wondering how large are the 17'' OZ racing wheels that came on some of the St205s? My guess would be 7.5 but not sure....
1) You can just go to a dealership or autozone and they can look up the parts for you.
2) I don't believe you would need anything special since it's j...
Are you a troll!?...
Also the speedo issue
when ur going 70, itll be about 1mph off
speedo: 70
your speed: 71
no biggie unless you try to push the limits...
are they 5 x 100 or the other kind......
probably coming from somewhere around there...B, use some degreaser and clean it and spray it down and then start your inspection...could be the greas...
check the FS section....
another thing to consider is front suspension polyurethane bushings for the control arms...
Have been running them on my car for about 2 and a half years now; around 37k miles with no problems. Replaced the front brake pads late this summer a...
I used a 1 ton fence puller. Wrapped the cable around the part of the halfshaft where it narrows before going into the differential and the other end ...
Great post Rico
Kinda irritating all these none-sense threads popping up...
^ Yes, but Teins are known to drop a bit more than that because they're on the softer side. The true drop is closer to 2" after everything settles, be...
After lowering my car and doing an alignment on it the caster was pretty even at 2.1 + caster on both front wheels. Since the springs are an equal dro...
about dozen mate
. read through this topic
http://www.6gc.net/forums/index.php?showtopic=65082...