💬 Island_Racer's Topics
Connectors in ECU area - 6G Celicas Forums
6th Generation Celica
› Interior/Audio/Electrical/Wiring
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Need you guys to help me identify that connector that just has a cap on it. It is found in the ecu area....you have the 3 ecu connectors, the circuit opening relay connector and then that last one im ...
0 replies
Topic ID: 97587
dialing in camshafts - 6G Celicas Forums
6th Generation Celica
› Engine/Transmission/Maintenance
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
ok, bought these camshafts, installed em and they work great...used some adjustable camgears and so they are set to 0 degrees (stock cam timing)...any tips for what advancement or retardation on eithe...
0 replies
Topic ID: 95439
CT20 turbo overboost - 6G Celicas Forums
6th Generation Celica
› Forced Induction
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
How capable are these turbos at surviving pressure above 18psi. Ive heard "hot air" etc...but i have a water injection system....i can clamp the signal and tune beyond the 18psi fuel cut but what othe...
10 replies
Topic ID: 95278
ecu pinout explanation - 6G Celicas Forums
6th Generation Celica
› Interior/Audio/Electrical/Wiring
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Hello,
i been wiring in some new equipment and from looking on the ecu pinout for the st205 i saw the following relating to the distributor and would like some explanation on eachs purpose:
G2 - Distr...
i been wiring in some new equipment and from looking on the ecu pinout for the st205 i saw the following relating to the distributor and would like some explanation on eachs purpose:
G2 - Distr...
1 replies
Topic ID: 95037
Hitting the Speed Limiter - 6G Celicas Forums
6th Generation Celica
› General Discussion
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Last reply: ModeratorJoined Jun 29, '08From DenverCurrentlyOfflineReputation:59(100%)
This morning I lost a race to this Audi S5 on my local track....now i never normally track my car and my speedo doesnt work. So we take off and my car pulls way off, top of 5th now and randomly it fee...
6 replies
Topic ID: 93276
Oxygen sensor help - 6G Celicas Forums
6th Generation Celica
› Engine/Transmission/Maintenance
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Just need a little help id-ing some wires.
The connector for the o2 sensor broke in my hands and now i need to know which wire (harness side) connects to which wire (sensor side), so if anyone could j...
The connector for the o2 sensor broke in my hands and now i need to know which wire (harness side) connects to which wire (sensor side), so if anyone could j...
5 replies
Topic ID: 92495
New emanage - 6G Celicas Forums
6th Generation Celica
› Interior/Audio/Electrical/Wiring
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
anyone seen those new smaller emanage blue units?
0 replies
Topic ID: 92187
ABS and Speedo - 6G Celicas Forums
6th Generation Celica
› Suspension/Handling/Braking
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Hey guys,
I deactivated my ABS, does this affect my speedo, or is there a separate sensor in my gearbox.....
1995 Celica GT4 (ST205)
I deactivated my ABS, does this affect my speedo, or is there a separate sensor in my gearbox.....
1995 Celica GT4 (ST205)
2 replies
Topic ID: 91879
Throttle Position Sensor Adjustment - 6G Celicas Forums
6th Generation Celica
› Engine/Transmission/Maintenance
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Hello,
I had to pull off my tps recently and i installed it again without much thought......i got misfires at WOT and it hit me instanly the tps needs to be adjusted properly......
What is the procedu...
I had to pull off my tps recently and i installed it again without much thought......i got misfires at WOT and it hit me instanly the tps needs to be adjusted properly......
What is the procedu...
6 replies
Topic ID: 91310
Stock Manifold VS. Tubular - 6G Celicas Forums
6th Generation Celica
› Forced Induction
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Last reply: ModeratorJoined Oct 1, '02From fall river, maCurrentlyOfflineReputation:13(100%)
Yo,
Im sure everyone has seen the tubular manifolds for the 3S-GTE engines, (2nd and 3rd Gen)
I have one, but currently i been working on my engine and took it off....
What yall think about em, i was ...
Im sure everyone has seen the tubular manifolds for the 3S-GTE engines, (2nd and 3rd Gen)
I have one, but currently i been working on my engine and took it off....
What yall think about em, i was ...
5 replies
Topic ID: 91075
Knock knock - 6G Celicas Forums
6th Generation Celica
› Engine/Transmission/Maintenance
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Hey guys,
My car is throwing code 52 to me....only when the car heats up though. When she is cold she can rev and nothing happens, but the second she is at running temperatures, as soon as i pass 3000...
My car is throwing code 52 to me....only when the car heats up though. When she is cold she can rev and nothing happens, but the second she is at running temperatures, as soon as i pass 3000...
4 replies
Topic ID: 90492
Power Loss - 6G Celicas Forums
6th Generation Celica
› Forced Induction
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Last reply: ModeratorJoined Oct 1, '02From fall river, maCurrentlyOfflineReputation:13(100%)
Hello,
I am wondering how i see people talking about turning up boost to 17psi on their CT20's yet no one had specified whether they changed spark plug gap nor retarded timing at all......So i turnt u...
I am wondering how i see people talking about turning up boost to 17psi on their CT20's yet no one had specified whether they changed spark plug gap nor retarded timing at all......So i turnt u...
11 replies
Topic ID: 89581
Clocking - 6G Celicas Forums
6th Generation Celica
› Forced Induction
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Hello.
Is it possible to clock a ct20 turbo, cant bother to take it off to realize if i can or not.
Is it possible to clock a ct20 turbo, cant bother to take it off to realize if i can or not.
3 replies
Topic ID: 89256
Management Systems - 6G Celicas Forums
6th Generation Celica
› Engine/Transmission/Maintenance
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Hello all,
What management system is best for a 3rd Gen 3S-GTE?
Currently im using an emanage blue but it isnt doing as well as i had hoped.
So....im in the market for what piggyback may be better for...
What management system is best for a 3rd Gen 3S-GTE?
Currently im using an emanage blue but it isnt doing as well as i had hoped.
So....im in the market for what piggyback may be better for...
7 replies
Topic ID: 89209
Brake Pads - 6G Celicas Forums
6th Generation Celica
› Suspension/Handling/Braking
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Hello,
I lost my shields for my brake pads and as such am getting clinking sounds in the braking system. What other vehicle uses the same brake pads front, rear or both. I wanna get some shields
I lost my shields for my brake pads and as such am getting clinking sounds in the braking system. What other vehicle uses the same brake pads front, rear or both. I wanna get some shields
1 replies
Topic ID: 89184
Code 54 - 6G Celicas Forums
6th Generation Celica
› Interior/Audio/Electrical/Wiring
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Hey Guys,
Ive already solved this problem years ago, by both bridging the fluid level sensor, and by rewiring the pump plug, but now i have the CEL back and i cant remember for the life of me where i ...
Ive already solved this problem years ago, by both bridging the fluid level sensor, and by rewiring the pump plug, but now i have the CEL back and i cant remember for the life of me where i ...
5 replies
Topic ID: 88607
Installing Fuel Pressure Gauge - 6G Celicas Forums
6th Generation Celica
› Engine/Transmission/Maintenance
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Hey guys,
Ive installed one of thos aem fuel pressure gauges on my dash and have it wired up, only thing is, I wonder where to tap the pressure sensor.
Any tips on where anyone put theirs? I can make ...
Ive installed one of thos aem fuel pressure gauges on my dash and have it wired up, only thing is, I wonder where to tap the pressure sensor.
Any tips on where anyone put theirs? I can make ...
5 replies
Topic ID: 88522
New Pistons - 6G Celicas Forums
6th Generation Celica
› Engine/Transmission/Maintenance
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Hello 6GC members,
I just need a lil info, i have a set of wiseco forged (bore : 86.5mm) and wanna know what ring gap is needed for proper installation
thanks.
I just need a lil info, i have a set of wiseco forged (bore : 86.5mm) and wanna know what ring gap is needed for proper installation
thanks.
6 replies
Topic ID: 88346
Removing Pins from ecu connector - 6G Celicas Forums
6th Generation Celica
› Interior/Audio/Electrical/Wiring
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Anyone good at removing these pins?
Would love some pics and tips
Would love some pics and tips
1 replies
Topic ID: 87616
Bee R rev limiter - 6G Celicas Forums
6th Generation Celica
› Interior/Audio/Electrical/Wiring
Started: EnthusiastJoined Sep 9, '08From JamaicaCurrentlyOfflineReputation:1(100%)
Hello,
I installed a Bee R rev limiter and had been having some issues with it.
Red - Power
Black - Chassis Ground
White - Handbrake
Yellow - IGF
Green - NE
and i cut the grey wire.....
anyone else ha...
I installed a Bee R rev limiter and had been having some issues with it.
Red - Power
Black - Chassis Ground
White - Handbrake
Yellow - IGF
Green - NE
and i cut the grey wire.....
anyone else ha...
0 replies
Topic ID: 87551
Showing page 1 of 3 (48 total topics started)