Suspension/Handling/Braking

5,114 Total Topics
25 Showing
46 Page 46 of 205
Topics in Suspension/Handling/Braking • newest topics first
6 posts • Started by cheela
finally got a chance to put on my new ATE Slotted Discs and Akebono pads. WHOO! also painted the calipers and rotors. here's the nasty prep paint blah...
9 posts • Started by easternpiro1
1 posts • Started by jtmlb3k
Hey guys, Well I figured out my power steering issue and got that fixed, but now I have another problem: my rear right brake clicks. It doesn't always...
6 posts • Started by BonzaiCelica
Ahhh thinking to get 205/40 RT615's. Pretty awesome tyres haha. But the 40 tyre wall is going to be **** i rekon. Does anyone have pics of 40 tyre wal...
7 posts • Started by block
After doing it a few times I've found the easiest way is to get a pry bar wedged in there and hit it with a sledgehammer. I pried and pried and pried...
11 posts • Started by 95st-celica
alright thanks for that info. I'll contact him...
9 posts • Started by azn87
100% sure, the gt4 ones are a bit longer...
2 posts • Started by mkernz22
QUOTE (zakinabox @ Aug 31, 2010 - 8:55 PM) sooooo, i went to do my rear brakes today with incredible issues, as usual, but inevitably turned out fine ...
3 posts • Started by mkernz22
IMPO, I'd say go with the 15x7 since they will be wider and you'll have some more traction...
12 posts • Started by Johnnyny
good job zak!...
4 posts • Started by 95CelicaST
Did you check the pump or the fuse? (if there is a fuse?) Your pump could have sh!t the bed....
7 posts • Started by block
Hey, I am looking to buy some winter wheels. I got a line on 195 70 R 14 I was wondering if they will fit my 94 GTS 2.2L.. The 14" rims came from a C...
7 posts • Started by block
haha thanks a lot bro. is it really that much more expensive in aus? This post has been edited by block : Aug 26, 2010 - 11:01 PM...
13 posts • Started by 95CelicaST
A 60 serious side wall is fine instead of 55. I used those on my car for a while and i didn't notice a difference. It actually reduced the 4x4 look a ...
5 posts • Started by marinos
Hello, I am listening clunk noises from the back of my car under braking. Actually as i brake and when the car is close to stop just before stop spinn...
5 posts • Started by DarkLupus
Cardone! The axles are more beefy than stock and they are brand new, not re-manufactured!...
5 posts • Started by 95CelicaST
ok so on the rear suspension of my 94 stx coupe there was a thick rubber doughnut-like gasket/spacer that sat between the top part of the spring and t...
24 posts • Started by Batman722
as you are pushing the pads out and removing the calipers. Since you dont want to force any fluid back up the system....
8 posts • Started by Capone
Excuse my noobness in the suspension area of our cars because frankly, I have no clue on where to start and what all I would need to accomplish what I...
37 posts • Started by bccentaur3
^^^ i just bought a right caliper on ebay. will keep posted...
15 posts • Started by 808celica
-5 on front and -15 rear. you'll need 3 sets of camber bolts 2 sets for the rear and 1 for the front. then you'll need pillowball mounts up front too...
4 posts • Started by Johnnyny
I got some decent looking Enkei rims, but the tires are crap. I'm looking for something decently cheap, but good. The tires are the Goodyear Eagle GT ...
12 posts • Started by cheela
3 point is not recommended for rally driving as the energy transferred to the chassis can crack your windshield, like on a jump / sudden deep etc Edit...
14 posts • Started by 808celica
.. because usually there is nothing wrong with the 'core' parts and only the worn/defective parts are replaced. but then again, you can pay 2-3 times...
1 posts • Started by Raves44
So i put the TRD springs on my car and was expecting it to lower the car, well it did but only in the back. i see other people cars on here and both t...