Suspension/Handling/Braking
5,114
Total Topics
25
Showing
44
Page 44 of 205
Topics in Suspension/Handling/Braking •
newest topics first
Hello I am doing a full brake job on my 94 celica gt with 4 wheel disc brakes. I am wondering if I can get rid of the shims slide onto the pads. They ...
I just got some 4 lug wheels for dirt cheap...but obviously they dont fit the celica...
my question is...HOW do i make them fit...
what parts do i nee...
if the rotors are the the same size and everything as the stock ones, you should be able to use pads from autozone
I have drill and slotted on my car,...
32mm front
16mm back...
Do your bearings squeak going down the road? If you Jack the car up in the front can you grab a wheel and check for vertical play in it (Move it back ...
what is the hub clearance that you need for the gt-4 brakes?...
I have a widebodykit and I'm planning to put 245/35/17 wheels in the front and the back with offset size +7
Will this affect the ride quality or is it...
I'm thinking about it.
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...RK%3AMEWAX%3AIT
Pics?
Also, id it necessary to upgrade brake cylinder?
Thanks....
10mm front spacers should be ok, I would suggest maybe 25mm for the rear? while the front lip is already factory rolled you will definitely need to ro...
Hello I have a 94 celica gt and my wishbone rubber bushings need to be replaced, I am trying to find polyurethane bushings but energy suspension and ...
Ahh I see, well I don't know much about the hubs, sorry man!...
both you jackasses better just stop, or i am going to ban you both....
^^^, the purpose is to keep it cheap. And this is as cheap as it gets. LOL. Like said, i dont want to pay more than 500 for brakes, this car is a ...
Absolutely terrible not having power steering if its your daily.
My first car, a honda civic dx had no power steering and I learned to drive 5 speed i...
closest to 0 as possible without passing the 30mm mark. go get your alignment rechecked just in case....
Got my Plug and Play Airbag suspension kit for sale on ebay,item number 260680455748,starting bid is $1000.hope some can use it...
Agree with above post. The complete struts are only a few dollars more, so no sense putting new cartridges in your old struts. Not worth your time/lab...
Hey all, wondering if 6G lowering springs would work in a 5G... geometry seems to be the same, and I have personally put 5g struts on the rear of a 6g...
After I take care of some errands around campus I'm gonna go out to my car and look....
I can honestly vouch that Meagans are pretty good. SexciCelicaChikk is riding on a set and they actually feel way better than my Tanabe Sustec Pros. ...
alright first off THANKS TO ALL THE PEOPLE THAT HELPED!
secondly the problem! stupid i should have known but it didnt cross my mind at all.. so here i...
Drums to disc... just saying
<---hipocrite
This post has been edited by
Johnnyny
: Oct 18, 2010 - 5:21 AM...
@3waystunna... So the rotor is fine. Did the caliper line up correct? If so, all I have to do is tap threads into the steering knuckle of the st202 a...
hey
i wanted to know if the ss3 rotors will fit into a ss1 caliper?
i know ss3 are 275mm front and 269mm rear
ss1 are smaller..255mm thiink and..¿249m...
my cousin has a 7th gen celica and just got some coilovers. now his TRD springs are just sitting. i was wondering if it'll fit the 6th gen celica or n...