My finished product.
DEI wrap and DEI HT silicone sealer.
This post has been edited by bindertch: Jul 22, 2006 - 8:24 PM
DEI wrap and DEI HT silicone sealer.
This post has been edited by bindertch: Jul 22, 2006 - 8:24 PM
My New Chrome Header - 6G Celicas Forums
that the header from the gb?
Nope. It is the same one that I had on at the meet. Just with a little less rust.
>
overwrapped in what way? too much overlap or too many layers? its one layer overlapped 1/2 way.
QUOTE(LewFX @ Jul 22, 2006 - 4:30 PM) [snapback]459588[/snapback]
>
looks like you overwrapped it too much, too much wrap is bad
looks like you overwrapped it too much, too much wrap is bad
overwrapped in what way? too much overlap or too many layers? its one layer overlapped 1/2 way.
2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E
oh okay then it should be fine
binder, wheres your tie straps?
i just used bailing wire twisted tight.
i just used bailing wire twisted tight.
2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E
>
They are at the top and bottom of the runners. They blended in when I did the silicone treatment. Also DEI says that if you have too much overlap that the header could be damaged. It is on thier site at www.designengineering.com
QUOTE(Bitter @ Jul 23, 2006 - 9:16 AM) [snapback]459776[/snapback]
>
binder, wheres your tie straps?
i just used bailing wire twisted tight.
binder, wheres your tie straps?
i just used bailing wire twisted tight.
They are at the top and bottom of the runners. They blended in when I did the silicone treatment. Also DEI says that if you have too much overlap that the header could be damaged. It is on thier site at www.designengineering.com
eh, im not too worried.
2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E
>
hey guys, sorry about this, but i was wondering does anyone know the cable/lead running just above the manifold? cause it's been puzzling me cause i'm not sure what it is, so i can go out and get one, cause that cable is in pretty bad condition in my car, the plastic keeps snapping when u move it.
QUOTE(LewFX @ May 21, 2006 - 10:41 AM) [snapback]436241[/snapback]
>
pics!
Vid!
http://www.lewfx.com/6GC/header/MOV00807-1.wmv
i have yet to take it around and test it, will post that comment later.
got the header off ebay..yes eeeebay, the 4-1 chrome header, made an offer of 260 and shipping was 30 bux.
pics!
Vid!
http://www.lewfx.com/6GC/header/MOV00807-1.wmv
i have yet to take it around and test it, will post that comment later.
got the header off ebay..yes eeeebay, the 4-1 chrome header, made an offer of 260 and shipping was 30 bux.
hey guys, sorry about this, but i was wondering does anyone know the cable/lead running just above the manifold? cause it's been puzzling me cause i'm not sure what it is, so i can go out and get one, cause that cable is in pretty bad condition in my car, the plastic keeps snapping when u move it.
it hooks to the throttle, might be cruise control?
2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E
The one shown there on Lew's car looks like the throttle cable. I would have to see a better pic to tel for sure. Also if you trace it back it should go to the firewall if it is the main throtle cable. If it goes to the side and is connected into a box it is the cruise control.
thanks guys, lol in other words i still need to get it replaced, anywayz all is good, thanks for ur helps guys and it makes sense, my cruise control isn't as responsive now i've noticed