Suspension/Handling/Braking
5,114
Total Topics
25
Showing
66
Page 66 of 205
Topics in Suspension/Handling/Braking •
newest topics first
For a while now, when im at 15-23mph the WHOLE car vibrates horribly. It is faint when accelerating, if i am slowing down without brakes it is worse, ...
i have the trd coilover kit on my gt4 st205 and the front shocker insert cartrage is away. now ive found on the trd parts site the part number for the...
hey, I am having a problem deciding which topmount will actually fit into the GT. KYB apparently have two kit and monroe have 1? have anyone had any...
All driver in the FWD game:
I had it down pretty well, the video concentrates on the SS, the gt2 is that black blurr passing the camara in the beggini...
Acually, when i was removing the old (first) axle, if you remember i made a thread, and when i pulled on it i didn't know about the c-clip so i yanked...
Brake fluid is filled to between the markers. After changing the brakes I bled the brake system completely and of course kept topping up during the bl...
as stated above... lift BOTH front tires all the way off the ground... the sway bar is giving you tension... should be an easy slide in after that...
...
I have a 3SGTE swapped into AT200 body. I'm looking to upgrade my suspension. The goal is less body roll. I want the Celica to be glued to the road! ...
Can someone tell me what these are.
This is my front shock, is it non-sealed?
and here is my rear
thanks....
"C-One"...
A friend of mine works in the friction business. Learned lots from him. Go for grooved/slotted discs, not drilled. Drilling makes the disc unreliable,...
^^^^
this car is actually pretty easy. too bad pepboys ordered the wrong one for me, i will get to do it again when i either buy one from toyota or a...
i just adjusted mine a couple weeks ago. once you have the wheel off, then take the rubber plug out of the rotor, and rotate the hole to 6o'clock
you...
carquest is a good option....
Im getting a 97 gt hatchback for parts the car was rolled so there is a few good parts but it does have four wheel brakes. My question is if i was to ...
found it:
QUOTE (alltracman78 @ Feb 25, 2008 - 8:10 PM)
If your ABS light stays steady when you jump the terminals the ABS ECU is probably bad....
Try...
front - there's not much difference but the GT are bigger. The parts aren't interchangable, not worth it in any way IMO
rear, GTs have disks, ST = dru...
Alright, since no one seems to have an answer for me, I will ask another question:
Does anyone have an illustrated procedure for replacing hand brake ...
Hmm, i guess not...
Well, after some massive browsing on the internet, I think I found what's going on.
My Celica has a twin piston brake caliper on f...
I need to change my non-ABS rear wheel to have a speed sensor, and figured that swapping some ABS parts in would do the trick. Can someone please post...
I'd just replace the whole strut. It's simply the better solution than only change the housing!...
... i think we need a sticcy about bleeding brakes, seriously would totally make sense... lol plus the fact that i need to bleed my brakes and i cant ...
HI All
Will Lowerd spring for 2002 toyota celica (Japens brand RS-R) fit on a 1996/8 Curren ?...
am ganna go with kyb gr2 struts,some ebay coil-overs,camber kits, do i need anything else?...