bloodMoney

#1

It took 6 months of searching, but I finally found another 6g to replace my Abby....





She's a 96 GT 25th anniversary No. 0455. 128,xxx miles, Autofail, tan top.

There are a host of issues that need to be fixed, as with any new used car, but this is what I found so far:

Needs:
Driver's side axle
Driver's side wheel bearing
Poly bushings all around
Struts and springs
Fuel filler neck and gaskets
Wheels and Tires
Quarter Windows need adjusted
Door Cards
Deck lid leaks on the driver's side

There is some rust that needs to be addressed, but luckily it is still at the point where it can be fixed without too much trouble.

Once I get the steering/suspension fixed, I'll drive her like that for a bit to confirm that we're ok for daily duty, then we'll begin planning modifications.

I'll try and take more pictures as I get the opportunity. I'm just happy to be back in one.

This post has been edited by bloodMoney: May 19, 2014 - 9:46 AM

---

~bloodMoney

richee3

#2

Glad to see you finally found another one! This thread is gonna be good.

---

"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.

Bitter

#3

So that's like your hut in the backyard? It's pretty much a tent on wheels after all.

Keep the steelies, get some trim rings powder coated matte white, paint the wheels body color. PIMP. Like permanent white wall tires for cruising slow.

This post has been edited by Bitter: May 19, 2014 - 12:28 PM

---

2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E

cheela

#4

paint it blurple and call it the buttloaf mobile? hahaha

looks like a good starter though. hopefully you can fix all those little things.

---

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.

enderswift

#5

Stand by for upcoming junkyard runs! I'll let you know next time we head out to one of them. I can't wait to see what you turn this into :

bloodMoney

#6

Thanks guys!

Luke, you and Noberto really upped the game as far as fix-as-find rust mitigation.... I need to keep up!

Plus, I'm always down for a junkyard run

---

~bloodMoney

njccmd2002

#7

that car needs v6 in it...

---

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.

njccmd2002

#8

So any updates?

---

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.

Bitter

#9

Yea, I had forgotten about Chris's hut!

---

2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E

Edser

#10

Mmm that Celica is lovely. I hope to see some updates!

bloodMoney

#11

Hi guys, I've been off the board for a while as I've been completely wiped out by work (the real job).

Okay, so for an update....























































That's right. Nothing.

Lily has a caster issue on the front passenger side which I think was caused by an accident with the PO. I'm not sure if it is something simple like an E-W crossmember or bent control arm. I replaced the axles in the fall and it all came apart and went back together without issue, so I'm doubting this is the case. My fear is that she has a tweaked frame.

If I happen across the crossmembers/suspension for basically free, I'll swap them out and see.... But for now, she will continue to be a DD.

Stacy has changed my direction on which car to focus my attention on, and the wagon appears to have won out. We've blown the car budget for this year already in preparing the car for this upcoming season, so there is nothing left to modify Lily. Maintain/Fix; yes. Modify; no.

So, unless this turns into a Sydney (wagon) build thread, this thread will merely be boring maintenance posts...

Sorry to disappoint.

---

~bloodMoney

richee3

#12

Totally understandable. The wagon is certainly a more capable car. Keeping the 'vert as a DD and weekend cruiser makes more sense.

---

"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.

Bitter

#13

How much is the caster off by? When I dropped the 7th gen I was able to push my caster back in spec by forcing the subframe forward with a winch before torquing the bolts back down. There's some play in it against the body, the 6th gen is similar there to the 7th I'm sure. If it's not a big difference in caster between the sides you can slot the strut tower and lean the strut forward or backward to get the caster needed.

---

2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E

bloodMoney

#14

The caster is off on the bottom Jordan. So much so, that when I turn the wheel to full lock on the right, the wheel rubs the back of the wheel well. It's worn the liner through and shined up the steel real nice....

Now this ****er needs a rear hub because I screwed the threads up trying to get it out of the bearing without a press.

---

~bloodMoney

Bitter

#15

Got it, that's a huge amount of caster not a little. Some crappy insurance or cheap shop probably just compensated with a ton of toe on that one side to make it track straight instead of fixing it right.

So, there's a few front frames on car-part.com at yards near you and all under $200. Even a few for GT's! I assume the vert and coupe use the same front subframe, search using engine cradle, I looked at 95 but all the 6G's are the same right?

1995
Engine Cradle/Rear Crossmember
Toyota Celica Front,2.2L,MANUAL TRANS-182K 15% RESTOCKING FEE A JDS110806 $75 Shaw's Auto Salvage & Repair USA-WI(Warrens) Request_Quote 608-372-3164/800-471-9164

---

2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E

navseal345

#16

Kinda what Bitter said. If the caster is off that much the control arm and/ or ball joint would be my first choice, I would then lead towards the cradle. BUT if you were to get a alignment print out & post it up that way we could determine how far off all the numbers are.

I've seen bad caster #'s to were the control arm is ok but the strut might be bent and/ or twisted.

Bitter

#17

Cradle, control arm, ball joint, inner/outer tierod, and pair of new front struts with top mounts.

---

2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E

bloodMoney

#18

So, I should've just done the 5x114 conversion when I did the rear wheel bearings.... My driver's front wheel bearing gave up the ghost and toasted my front tire in the process. Now I'm waiting on new bearings for the front to get her back on the road.

I also ordered replacement brakes all the way around.

The bearings, coupled with the brakes, new struts/springs, and lower control arms; maybe I'll start enjoying driving this thing again.

I've also decided that I need a manual swap bad. I don't know how you guys with autos deal with it. I'm sooooo booooooored.

EDIT: HAVE SOME OTHER PICTURES.





This post has been edited by bloodMoney: May 4, 2015 - 10:13 AM

---

~bloodMoney

navseal345

#19

Well w/ an auto you can at least text & drive.

Keiri

#20

I deal with the auto by just listening to good music and telling myself that I don't need a stick for the 3 mile commute I make.

---

Has no more Celicas

enderswift

#21

manual swap? I sense a junkyard run in our future

This post has been edited by enderswift: May 4, 2015 - 3:06 PM

bloodMoney

#22

I have a lead on a pretty complete parts car in Elkhart... Maybe we make some time Luke?

---

~bloodMoney

enderswift

#23

>

QUOTE (bloodMoney @ May 4, 2015 - 8:00 PM)

>I have a lead on a pretty complete parts car in Elkhart... Maybe we make some time Luke?

I'd be down

Bitter

#24

What the hell did you do to the baby wagon?

---

2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E

bloodMoney

#25

Now it looks as good as it goes

---

~bloodMoney

Bitter

#26

you're gonna scramble that poor kids brain (that somoan sperm is strong swimmers bruh)

---

2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E

richee3

#27

>

QUOTE (bloodMoney @ May 4, 2015 - 10:10 AM)

>#4SS #fourstarsociety #lancer #sportback #ralliart #jdmchicago #slammed #bagged #mitsubishi #lulz #wagon

Phiksed that for ya.

---

"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.

bloodMoney

#28

BAHAHAHAHAHA

Gotta love the insta tags

---

~bloodMoney

Bigblock

#29

I gots a 460 Big Block, fit no pro'lem

I'll go see if anything is left of my.... anyway, if there's anything,
What would you want pics of that might come in handy?
Radiator & mounts were almost brand spankin new, susp was gone,
Tires were a bit more than a year old, maybe 10,000 miles on em.
Gas tank bad. Trans was good, 5 speed.
Remember, I have not learned what can swap from pre-face, GT,etc...
It was a 94 ST.......
Anything, LMK & I'll check on it. I'm off tomorrow & Thursday

( edit )
Inner doors??
Speakers??

This post has been edited by Bigblock: May 5, 2015 - 8:57 PM

mkernz22

#30

>

QUOTE (bloodMoney @ May 4, 2015 - 11:10 AM)

>I've also decided that I need a manual swap bad. I don't know how you guys with autos deal with it. I'm sooooo booooooored.

I mean, if your state doesn't require OBDII testing for a 96+ car, I have everything you need for a manual swap, the wiring is for a 1994 though.

This post has been edited by mkernz22: May 6, 2015 - 12:48 PM