rave2n

#241

3 weeks out of surgery.

2 more weeks to go, and I can start moving again.

having issue with the passenger carrier bracket. Seems I have to make up something to have it bolt properly to the block. If anyone could take a moment to send some pictures my way with what they did, it would be much appreciated.

enderswift

#242

I used washers as spacers. been years without issues

rave2n

#243

>

QUOTE (enderswift @ Apr 4, 2016 - 8:45 PM)

>I used washers as spacers. been years without issues

Mine just doesn't seem to line up =/ Its off by like a quarter inch on the top bolt.

rave2n

#244

So I'm still alive.

I traded in my Jeep today after 3 long years of...Jeep...Easiest way to say it.

Came home with a 2010 Tacoma Prerunner SR5 - What I originally wanted. Loving it.

So, Im back to being all yota.

I did work on the Celica this weekend, finally found the spot for the passenger side axle bracket on the block, and worked on the PS pump some more. Its been a year since I worked on it, but..it felt good.

I won't make promises that I'll ever finish this, but..it did feel nice.

This post has been edited by rave2n: Jan 10, 2017 - 7:46 PM

SwissFerdi

#245

If you want a hand for a few hours I'm down...your trans is still running well.

---

'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE

rave2n

#246

>

QUOTE (SwissFerdi @ Jan 10, 2017 - 10:41 PM)

>If you want a hand for a few hours I'm down...your trans is still running well.

That would be cool, not this weekend, as I need to organize my garage and project to even have a idea of what to do next, but the following is open =)

rave2n

#247

If anyone is interested in purchasing this project.

Let me know.

Id like 3k. Very fair considering the investment put in this far.

ricochet1490

#248

Why not finish at this point? It's basically engine just has to make it in the car now right?

rave2n

#249

>

QUOTE (ricochet1490 @ Jun 2, 2017 - 8:48 AM)

>Why not finish at this point? It's basically engine just has to make it in the car now right?

I've been mulling over it for 2 years...maybe more now. I just cannot get the fire under my ass to finish it.

Engine is already in lol.

Literally all it needs is a couple wires on the harness extended, exhaust installed, AC condon if you want AC replaced, and a better heat exchanger mounting.

I have all the pieces except the exhaust which I was just going to take to a shop to finish.

I'd says its 2 weekends of work, and 500 bucks and its a done. The rest is cosmetic cleanup from sitting so long.

This post has been edited by rave2n: Jun 2, 2017 - 8:22 AM

ricochet1490

#250

I drive mine on occasion. It isn't perfect, but there is nothing like Celica handling in the corners because of the feedback the car gives you. You owe it to yourself to know what that feels like again, this time with actual horsepower. Too much engine work has been done, and I guarantee that if mine wasn't RHD, I'd drive it everyday and would not have a $400 payment every month.
You're right there, Jerry rig it and cut a hole in the firewall if you have to!

rave2n

#251

>

QUOTE (ricochet1490 @ Jun 2, 2017 - 11:03 AM)

>I drive mine on occasion. It isn't perfect, but there is nothing like Celica handling in the corners because of the feedback the car gives you. You owe it to yourself to know what that feels like again, this time with actual horsepower. Too much engine work has been done, and I guarantee that if mine wasn't RHD, I'd drive it everyday and would not have a $400 payment every month.
You're right there, Jerry rig it and cut a hole in the firewall if you have to!

I agree, and I know in its current state its a hard sell. I know its value, down to the dollar, and I've seen better sell for less, simply to have it gone faster.

Its why I price it at what I have. 3k is enough to have me move on and not feel as bad on the loss, but also not such a steal everyone is going to jump on it. I want to see it done one day, it would be my dream, one that I will have to commit to if no one wants it.

Its a rough path either way for me.

rave2n

#252

Not much interest as expected...

So..I put some pieces together, and figured whats next..

cheela

#253

by the time you get someone interested, it'll be finished and running already and you won't want to sell it anymore.
so that just means you gotta finish it!

---

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.

rave2n

#254

Yea, I'm done folks. I cannot finish it, just don't have the will. I have gone and got some things done, but after losing my temper on the driver side axle which is always my bane on this vehicle. Thats it...its got to go.

At this point, I care no further for the frame. I'll send it to the scrap yard at this point.

If anyone is interested in the motor, and all the damn work that went into it. Let me know. I have no interest in pulling it, take the frame w/engine and relieve me from this.

Done.

2.5k is the lowest I'll go for it all. Which is a steal.

latest pic



This post has been edited by rave2n: Sep 3, 2017 - 2:05 PM

njccmd2002

#255

damn, that is a steal.

so whats pending to be done? assuming S54 tranny. You know, I went through a lot of frustrations when I did my 2gr swap. wiring was the biggest nightmare. but I pulled trough, even after I herniated a disc and had surgery. from start to finish, lol, maybe 2 years. with other little side projects going on...

don't worry about the axle. finish everything first, then leave awful axle for last. lol. I understand if you really want to give it up. But regret is worse

dang. too bad its a 10 hour drive for me... take a deep breath step back, and relax.

BTW I bought my ra24 in 2009. its been 8 years, lol. still not done...

---

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.

rave2n

#256

>

QUOTE (njccmd2002 @ Sep 4, 2017 - 2:50 AM)

>damn, that is a steal.

so whats pending to be done? assuming S54 tranny. You know, I went through a lot of frustrations when I did my 2gr swap. wiring was the biggest nightmare. but I pulled trough, even after I herniated a disc and had surgery. from start to finish, lol, maybe 2 years. with other little side projects going on...

don't worry about the axle. finish everything first, then leave awful axle for last. lol. I understand if you really want to give it up. But regret is worse

dang. too bad its a 10 hour drive for me... take a deep breath step back, and relax.

BTW I bought my ra24 in 2009. its been 8 years, lol. still not done...

Nah tranny is perfect, I think its the reman axle I got that is causing the current hell, but its always hell on the drivers side.

Yea the hard wiring is done, but I did have my excitement figuring it all out lol. Only wiring now is extending a few connections so the harness reaches the ecu.

Yea the surgery I had and some life changes really made me turn on this project. Physically I'm not what I used to be, and it hurts to get under the vehicle, I cannot imagine a messed up back! I can work on it for like an hour, max 2 before I have to walk away for a bit..typically next day. I used to work on the damn thing 10+ hrs, and it frustrates the living hell out of me when I get stuck on something simple like an axle, then to be physically beat after it as well, with nothing accomplished =/

I have a friend that has some interest, he wants to come and see it, so we'll see how that pans out. I know its a handful for anyone to pick up, but its a diamond in the rough, just needs someone more capable than I, or me to stop being a little bitch. Time will tell.

SwissFerdi

#257

Does the axle lack provisions for a pry bar around the tulip? That was my struggle, and we ended up using a rope and pulley system to tug it out.

---

'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE

rave2n

#258

>

QUOTE (SwissFerdi @ Sep 4, 2017 - 12:14 PM)

>Does the axle lack provisions for a pry bar around the tulip? That was my struggle, and we ended up using a rope and pulley system to tug it out.

Nah, trying to put a new one in. Just won't line up and pop in.

njccmd2002

#259

the axle problem you have, is because when they rebuild them, they put a generic circlip, wich is crap. order the right circlip from the dealer and change it. I swear that i did that with mine. and the oem circlip goes in like butter

---

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.

SwissFerdi

#260

>

QUOTE (rave2n @ Sep 4, 2017 - 1:00 PM)

>Nah, trying to put a new one in. Just won't line up and pop in.

Oh, you got the hard part done! It sounds like only a serious day's work away from drivable.

---

'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE

rave2n

#261

>

QUOTE (njccmd2002 @ Sep 4, 2017 - 7:12 PM)

>the axle problem you have, is because when they rebuild them, they put a generic circlip, wich is crap. order the right circlip from the dealer and change it. I swear that i did that with mine. and the oem circlip goes in like butter

You were right, its the circlip. I simply removed it to confirm the shop didn't put in the wrong axle bearing in the transmission. Went right in with the clip off. Guess I could order one.

The circlip that came with the axle I could remove with my fingers, it was barely on there. So I think it was snagged in production and expanded it out to far.


>

QUOTE (SwissFerdi @ Sep 5, 2017 - 9:24 AM)

>>

QUOTE (rave2n @ Sep 4, 2017 - 1:00 PM)

>Nah, trying to put a new one in. Just won't line up and pop in.

Oh, you got the hard part done! It sounds like only a serious day's work away from drivable.

Lol, possibly, drivable as in it'll turn on and run, but there is quite a bit to accomplish after further review. Hoping for a cool night this weekend, and I'm going to try to get the walbro installed, not really a hard task or that physical. One more step to running.

Some interest has been found, but most people are a month or more out from seeing/purchasing. So, I'm cleaning it up, at a minimal, if all fall through, it'll be clean...possibly less overbearing to look at.

njccmd2002

#262

keep going at it. aftermarket circlips suck..

dedicate 30 min every two days. stop reading facebook in the toilet, and work on the car.

hate for you to regret it. unfortunately i had a mistake on my own. see the off topic section, but im using it as a postive experience..

---

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.

rave2n

#263

Taking nccmd2002's advice, I spent some time on it this weekend before the sun made it a bit to hot to be outside.

Had to clean the interior out a good bit to get to the fuel pump area. So managed to clean out the whole inside of any debris & parts over the years.

Being in FL, and humid nearly 24/7, the whole interior grew this very thin layer of mold all over. So I spend the whole hour and half I was at it wiping down everything and vacuuming out everything, including inside the pump section so nothing drops in the tank.

All in all, its a bit cleaner inside, and slightly less overbearing to look at

This post has been edited by rave2n: Oct 15, 2017 - 9:02 AM

SwissFerdi

#264

Little by little.

---

'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE

richee3

#265

I’m familiar with the mold growing inside the car. Gotta love humidity and parked Celicas. You’ll have this off on the road in no time!

---

"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.

cheela

#266

keep going at it.
you're literally almost there!

---

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.

njccmd2002

#267

>

QUOTE (rave2n @ Oct 15, 2017 - 8:53 AM)

>Taking nccmd2002's advice, I spent some time on it this weekend before the sun made it a bit to hot to be outside.

Had to clean the interior out a good bit to get to the fuel pump area. So managed to clean out the whole inside of any debris & parts over the years.

Being in FL, and humid nearly 24/7, the whole interior grew this very thin layer of mold all over. So I spend the whole hour and half I was at it wiping down everything and vacuuming out everything, including inside the pump section so nothing drops in the tank.

All in all, its a bit cleaner inside, and slightly less overbearing to look at

lysol spray. is it leather or cloth. i used lysol and took them out to the sun...

---

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.

rave2n

#268

**** I fell off.

I miss this.

Hope all are well, and thanks for being on the journey with me.

I saw a grey celica with a facelift recently and couldn't stop staring. I want to stop and talk to them...GGs all, I hope someone is still out there making the best of these dream machines.

timdog1720

#269

Bro I wish people would come back and revive this site again... COVID murdered 6GC

---

Always fast and going for the look......

CoolZeen

#270

yes we are here, people just check in and dont say nothing, since is mostly the og's , that know already almost everything and how to look in the forum. Then the others are just guest looking for only info that maybe nobody answer in fakebook