Over 1M Posts • 84K Topics • 9K Authors

Blood's Project Abby - 6G Celicas Forums

Topic #68896 157 posts Started by bloodMoney
So, Abby still needs her rear fenders rolled, and I can't seem to make time to do it, so she has sat in my garage since I took those last pictures... In the meantime, I've started planning out the engine swap.

So far, my list looks like this:

- V6 engine Purchased
- Intake Manifold $100
- Throttle Body $100
- Throttle Pedal $200
- ECU $100
- Engine harness, this includes connector A, B & C to the ECU. OBDII connector $200
- MR220V Conversion Harness $300-$500

New Parts
- Gouky install kit - $1600
- 1MZ flywheel. I used a Fidanza 9.5lb - 350$
- High HP clutch. $500
*** I may just go with a twin disk clutch at this point since a competetion twin clutch is only $1200
- E153 Trans Purchased
- Hybrid Axles w/ carrier bearing ??
- 61.5" 7rib v-belt - 60$
- fuel pressure regulator. The motor requires 43.5psi - 130$
- Toyota long life coolant - 70$

Exhaust Parts
I have to go full custom here, as it frees up quite a bit of horsepower. $$$

At the end of it all, I'm looking at about 5k. I'd like to pull it down for a season, pound out all the work and have it back up in a few months, but we all know how projects go....

Are you ready Daniel? smile.gif

~bloodMoney
man, its expensive. good luck, i want to do this at times, but feel like a big investment on a car i barely get to drive a lot. im gonna let u be the first one.

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
Just tell me a date to be up there. smile.gif

"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
Gotta buy a house first, then we'll start.

Stacy thinks that I should finish the wagon first, as that is only going to be about 3k to complete.

I think that I can bring the price down if I can find a car that has everything at a junkyard and pull it all in one fell swoop.

Luke: Unlikely. I may just have a mexi place crush bend some pipe for me. If I wanted to go big $$$, I'd take it to Touge Factory and have them bend/fab up an exhaust, but they're labor isn't cheap.

This post has been edited by bloodMoney: Jul 26, 2013 - 4:54 PM

~bloodMoney
u need to get rid of the engine, and youll save money.. to finish the wagon

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
Lol or I could sell the complete 3mz that I have too....

~bloodMoney
I don't know how strict laws are in your state but, man, for the price of getting an OEM ECU to work in there you could get a standalone...

1993 Celica GT Coupe - sold1994 Celica GT Liftback
>
QUOTE (bloodMoney @ Jul 26, 2013 - 5:52 PM) *
>Gotta buy a house first, then we'll start.

Stacy thinks that I should finish the wagon first, as that is only going to be about 3k to complete.

I think that I can bring the price down if I can find a car that has everything at a junkyard and pull it all in one fell swoop.

Luke: Unlikely. I may just have a mexi place crush bend some pipe for me. If I wanted to go big $$$, I'd take it to Touge Factory and have them bend/fab up an exhaust, but they're labor isn't cheap.


Ah gotcha. Well, I recommend Naperville exhaust works. Those guys charged me 300 to weld up all of my pieces and they did a fantastic job.
Hope to work on my 1mz this winter. Following the fun!! smile.gif

"Wheelman" for the Cardboard Mafia"https://www.facebook.com/robert.davis.520
It looks like the swap is going to have to wait.

Sadly, Abby is gone from us. Yesterday, a guy made a left turn across my lane and there just wasn't enough time for me to stop. There is no saving this one.

This picture was taken just a few hours before the wreck. Richee3 was up for a visit











And here's the other guy....





We'er both okay so far, woke up this morning sore, I've got seat belt rash/bruising and Stacy is still coughing the airbag smoke out of her lungs....

I just never even considered that her story would end this way. RIP Abby frown.gif

~bloodMoney
ugh..... damn....

totally NOT the update I was looking for when I clicked on this.
just happy you guys are ok.

RIP Abby. frown.gif

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.
wow, I'm very sorry to hear that....I'm glad that you guys are alright though!


Maybe it's time to buy a front clip? A little cut and paste action? haha
The BMW didn't get smashed from the wreck... You just don't kill Abby and get away with it.

Chris, I'm sorry to see that this happened, especially right after we left. You've been through a lot with this car and it's a terrible ending to her story. The most important thing is that you and Stacy weren't hurt. You can always transfer your parts to a new shell. I have no doubt that you'll come out ahead from all of this.

"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
I have a gt-four front clip if you're interested in putting your car back together, not sure how it would align.
But let me know.
Thanks guys. I'm thinking that I'll pick up another one depending on how things go.

Now it's just waiting and recovering. Daniel nailed it though. I've been through a lot with Abby and that's what's killing me right now.... 5 years of work, wiped out in one second.

~bloodMoney
yup, that's the thing. You can replace a celica, but you just can't replace an Abby. frown.gif

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.
Damn morons glad you guys are ok. That's the important thing. Now.........

Dibs on the 2gr, Lol. Jk...

Hopefully you'll find another one to ply with...

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
Wow, rough update to read so I know it's even rougher to be the one posting it. I second, and third, everyone else saying I'm glad you and Stacy are doing alright despite the loss of Abby.

Can't wait to see what you do next.

Has no more Celicas
Sorry to see this Chris.
Glad you guys are ok.

my st205 swapandour Beams swap
Omg!!! I'm soooo sorry guys frown.gif
I'm really glad your OK tho
The guy in the BMW needs to be killed with fire!!

95 gt coupe, v6 swap weekend toy99 gt hatch beams swapped wife's94 st hatch my daily driverhttp://www.6gc.net/forums/index.php?showtopic=82235n
Glad your ok. Sorry guys!

"Wheelman" for the Cardboard Mafia"https://www.facebook.com/robert.davis.520
Glad you guys are okay. You should report any injuries even if its just a sore.

I hate reading these kind of updates.
And it's weird that you always get hit on that side.

I hope this accident opens a door to something just as great or greater.

PROJECT 6TH GEN<FS: Things up for grabs><Progress>
Makes me angry just looking at it. That might actually be repairable depending on how the frame rail looks. Good luck with everything. Don't give up!
With what has happened, all it means is that you get to do this with it now. http://youtu.be/GNRZPxISOB8

Never Forget. - 2013 Mustang. I miss you every day.
Zack: no.

I'm pretty sure they are going to total her out. I don't know that she'd ever drive right again....

It's not the end, I've owned Celicas for the last 14 years... I'm not about to start now smile.gif

~bloodMoney
Sorry to hear that, at least everyone is ok. Anything is possible though, just look at Ben and what he's doing.

2001 Miata LS 5-speed
This is true.

I just need to take a closer look at the car now that my endorphins have returned to normal levels, but judging from the close-up pic of the front left side, I'm pretty sure the frame is tweaked inboard and rearward.

~bloodMoney
Looked again and one of the pictures it looked pretty bad, considering it was hit on the driver side but now the passenger side fender and door are way off. At least Mr. German Engineering's insurance will cover it, hopefully they'll offer something fair the first time around.

2001 Miata LS 5-speed
I hope you save receipts. In the event that they total and you settle it's best to provide receipts for any and all modifications, and to request an appraiser. You will end up getting more money in the end regardless of if you decide to keep the car and repair it, or let them take it away.