>
QUOTE(cnelson @ Dec 18, 2006 - 1:15 PM) [snapback]511362[/snapback]
>
Just a quick question, what'd you guys use to mount the LED's i used duck tape.. did you guys just drill holes? Also, how can you remove the vent to the right of the passenger seat? I really want to run some LED's in there, but couldn't get the vent out.. Also what else can i do on the inside of the car? -cnelson.

I'm back. The vent on the passenger side just pops out if I remember correctly. May take some wiggling but I would def try if you have the other ones done just to balance out the look. The Dome light is 1185 but you can add LEDs to them. o0black0o has a blue LED dome that we wired up. It looks really nice, alot better than my Red LED dome. LOL Also you can do the side doors redder [less orange-ish]. The headlight bulbs are super simple. Just pop the hood and look behind the high beams and you will see a black or grey twist out bulb harness. It's at the very back of the housing and has wires leading into it. You can't miss it. You will not need to remove any screws whatsoever. I used Sylvania Silverstars and they came out a nice white with a little more candlepower. You can also use the Sylvania Cool Blues if you want a white light with a blue rim around it.
There are also many more very high priced bulbs you can get but these are the most cost effective I've found.