Suspension/Handling/Braking
5,114
Total Topics
25
Showing
17
Page 17 of 205
Topics in Suspension/Handling/Braking •
newest topics first
^What he said. Lol....
awesome, the noise would really be a big issue for me. It's tough to make a case that your car has good handling performance when it sounds like its b...
Any suggestions on struts for a smoother / softer ride? My ride right now is ridiculously stiff and it bothers me especially considering the roads her...
Did you grease the rear of the pads where the piston makes contact? Otherwise, I'd wager at a seized caliper.
This post has been edited by
SwissFerdi
...
and if you get cheap bolt on's, you're going to have a bad time....
.
This post has been edited by
Box
: Aug 22, 2013 - 3:26 AM...
could be a collapsed brake hose. You will know if this is it when you go ahead and bleed the brakes. It will not have pressure behind it when the pers...
check to see if your caliper piston isnt binding...
Anybody running on these? There is a very small difference with the stock 205 55 R15 but I am wondering if that small difference has a night and day e...
#4777912010
#4776928010
That's what I found 2 part numbers either or depending on ur bin number they'll give you either one...
I will have to keep this in mind for my next v6...
I have gone through 6 axles in the last few months, and I'm still using the 5s. They all seem to break during hard left turns. The most recent axle th...
I wouldn't use washers to push a rotor out....thats a solid formula for twisting and very unsafe brakes...
Hi guys I bought a set of camber bolts fo rmy 94 celica gt as my new 17" wheels and tires with a 1" SPACER are wearing out on the inside tread due to ...
Are you asking what spring rates you should buy or what the motion ratio of your suspension is? IF your wanting to know the motion ratio then 99% of t...
dont buy moog rear mounts. they will clunk just as bad as the worn out oem ones within a few months....
.
This post has been edited by
SwissFerdi
: Aug 2, 2013 - 10:20 PM...
anyone used split axle boots before?
it comes in two halves and you weld them together.
sounds kinda sketchy and cheap but if it works I might do it f...
good pick with the GR-2's
the bushings are a good mod. You maybe might not feel to much of a difference without supporting mods (sways/poly enginemoun...
+1 on the poly bushings, you will see a world of differences in handling....
does any one know what would be a level drop for tein coilover? how many turns on front and rear for oem setting?...
Hi
I need to have installed some front camber bolts to resolve an unequal front camber issue on the car.
It is a 1995 Jap Import 2.0 GT Convertible (a...