Forced Induction
3,483
Total Topics
25
Showing
17
Page 17 of 140
Topics in Forced Induction •
newest topics first
Don't know because we don't know what the problem is. I don't know how the stock 5S ECU likes forced induction. Stock 5S injectors are only 215CC I th...
+1 for welded bungs...
i guess i should get a wideband now huh.. i have my clamp on its way, great write up Ben!...
although it did fix your problem the BOV probably wasn't your issue. think about how BOVs work. under boost they are pushed closed, then when you let ...
Did you have a basket ball needle or anything like that on the end?...
7M-GE yellow or green injectors...
all the rod does is open the flapper from the acutator. its possible that you are not building boost because the wastegate is damaged internally in th...
an FMU IS the cheap way.......
Anybody know if the twosrus one will work?...
^^ ouch...
Is the apexi safc 2 good?...
342 is the one you want.
http://www.monkeywrenchracing.com/product_...products_id=844...
*Spell check...
Hello guys i am wondering wich radiator i must to put in my toyota celica st205 koyo or mishimoto can any1 help me
thnx...
4 words...
mild steel & ceramic coating...
Another quick question... how is the wiring? Please don't tell me to just send it out.
I'm wondering if its plug and play. I'm new to toyota but old t...
Altitude also plays a factor in idle vacuum.
In Calgary (elev. approx. 1,000 m) my car idled at around 16 in when warmed up.
In Vancouver (sea level) ...
250Hp is my goal. Its right on the border line from what I can gather with stock pistons. And looking into the future, is 250hp gonna be enough to sat...
if you route back into the intake your intake air temp will be a little cooler. When the air is released from the compressed state it gets cooler (jus...
buy one of the many off the shelf turbo kits?
greddy/trust, HKS, blitz......
Hi all, I'm in the process of swapping a 3rd gen 3sgte from a GT4 into my '95 GT, including carrying over the stock WTA intercooler setup (my project ...
Bring the thread back from the dead, car is still doing this and just replaced the TPS and o2 recently..... Help?...
^^^ those are also low impedance injectors, you will need a resistor pack. just get the NA 7M-GE injectors. they are a drop in and work.
http://www.le...
i have a turbo manifold for the 7afe is you want it. i dont know if it will fit the turbo though......