Engine/Transmission/Maintenance

14,249 Total Topics
25 Showing
122 Page 122 of 570
Topics in Engine/Transmission/Maintenance • newest topics first
5 posts • Started by delusionz
all you need to pull is the EFI fuse for ~10-15 seconds, according to the BGB....
7 posts • Started by azn87
do u rev match??? i also used to grind into third upshifting and downshifting, but since i changed my oil to royal purple synchromax oil, its alot s...
14 posts • Started by 95CelicaST
4 drawer craftsman toolbox + a small cardboard box to hold my aerosol cans (paint, cleaners), propane can, and a large pry bar. It'll all easily fit i...
2 posts • Started by Neon90424
I have a 94 GT 2.2L and my transmission all of a sudden got really stiff to shift. It goes through all gears but it is a pain in the ass to get into g...
5 posts • Started by al94st
1st. manual trans swap!...
4 posts • Started by Liquid_Smoke
I noticed my celi dripping a little oil and when i jacked up the car there was just a huge mess but i think the spill is coming from this hole is ther...
12 posts • Started by Bigblock
1)Your gearbox is probably leaking oil. I had this problem with another type of car, the problem was occuring only in 2nd gear. It was some kind of be...
3 posts • Started by 95st-celica
can anyone confirm this?...
2 posts • Started by delusionz
Hey guys, I have a 94 Celica GT with a 3SGTE in it. The mounts were really bad, so I bought Kirk's engine mount inserts to help with the engine moveme...
3 posts • Started by SeverX13
OK, so my clutch needs to be replaced. I figure i can do this myself or take it to a shop. As far as mechanical experience goes i have done just about...
1 posts • Started by AG51292
So, my celica's been out of comission for about 6 months now and ive finally gotten the chance to rebuild. ive come across a problem though. The pin u...
11 posts • Started by czwalga
Are the splines the same on the e145f as they are on whatever tranny came with the 5SFE? If so I imagine the same clutch will work with either tranny...
3 posts • Started by CheesyLobster
Hey dudes, I got an CEL, and after resetting the ECU it still came right back. The guys at the mechanic shop wanted 50 bucks just to read the code! I ...
5 posts • Started by 95CelicaST
i need a block for my 04 gt. i wanna buy one from a 98 or newer. how do i know im im getting the right block. for example is there a serial number to ...
48 posts • Started by 95CelicaST
^^ Which is what the 5S gets to the crank. Not a bad improvement from the 7A at all. I couldn't agree with you more, Kyle. There are only a handful of...
4 posts • Started by mkernz22
I've been meaning to ask on here about my radiator fans, they come on full all the time even when the engines cold. Has anyone else had this problem ?...
1 posts • Started by yaj204
my check engine light has been on for a while now and it didnt really bother me until it started to choke, so i used a code reader to see what the pro...
43 posts • Started by al94st
before you continue any further, you need to find out what those plugs are for. especially if they were plugged before and not they are not, they mig...
15 posts • Started by 99celiGT
Changed the clutch out last weekend. Everything went well, besides a few SAE bolts found stripped in the casing. One little thing did pop up...I now h...
2 posts • Started by eboz74
after doing some research and reading back about 2 years i've noticed people using kirkosaurus mount inserts I'm in need of mounts bad so just wonderi...
9 posts • Started by Culpable04
Came out of my transmission (manual). Doesnt look like it broke off from anything, also the transmission shifted fine before I took it apart....
22 posts • Started by 95CelicaST
@ PRESURE No chance of a vid at the moment bro. I understand about it running out of power at 4000+, that's what the PO told me when I was raging a...
13 posts • Started by block
how do the ebay sellers sell these and have perfect feedback? never understood it....
6 posts • Started by HectortheRican
Hi, just use this menu to find the correct spark plug http://www.globaldenso.com/en/products/aftermarket/plug/ greetz...