what would i have to do to make my car an awd and how much would it cost
Gt awd conversion - 6G Celicas Forums
Prolly have to do the commonly talked about 3s-gte engine/tranny swap, although i never thought about just doing awd to the stock engine.........eh, i think if i had that kinda potential in my drivetrain i couldnt resist dropping in an engine thats up to par with the tranny, like the 3s.... >
>
Oh, and as for cost, it would probably be around 1.5k for the tranny, maybe.....?? Not too sure aobut that, maybe someone else knows this topic a little better.
This post has been edited by Silver94CelicaOwner: Jan 30, 2003 - 6:14 PM
Oh, and as for cost, it would probably be around 1.5k for the tranny, maybe.....?? Not too sure aobut that, maybe someone else knows this topic a little better.
This post has been edited by Silver94CelicaOwner: Jan 30, 2003 - 6:14 PM
3rd gen ST205 3SGTE - Alive and boosting.
good luck finding those parts. even though i just recent;y learned that you can use parts from a matrix
Yo Igotta, I have the name of a guy at Toysport that's supposed to be good. if you want, I can go and hunt it for you.
try getting a 5th gen alltrac. It will have a 3sgte,tranny and rearend. I just went and checked one out at a local car dealer and The rear end is almost exactly the same as the 6th gen... I would think that you could bolt it up to a 6th gen chasie prettly easy.
otherwise if you use a 6th gen rearend you will need to relocate your gastank and do a little bit of cutting to fit the pumpkin. the exhaust also has to be moved but if you gonna do a 3sgte swap then its a smart Idea to move it newayz
otherwise if you use a 6th gen rearend you will need to relocate your gastank and do a little bit of cutting to fit the pumpkin. the exhaust also has to be moved but if you gonna do a 3sgte swap then its a smart Idea to move it newayz
99 project version 3.0.. hello SEMA 2010 =)
forgot to add that you can pick up a 5th gen alltrac stateside for around 3 grand... thats alot cheaper than trying to sorce all of the parts by them selves
99 project version 3.0.. hello SEMA 2010 =)