Hello fellow 6gc fam,

Been piecing together a RHD set up for a little while now... keyword little. If anyone has these parts that would save me some fabrication time and would rather go OEM anyways.

Here's what I'm looking for:

Firewall assembly, inside & outside (or if someone randomly has a front clip preferably)
Under dash components - HVAC system, none of the venting but units mounted to the firewall
Dash bar mount for the passenger side (left side)
metal brackets for the bottom of the dash/panels located above the kick panels

Have the rest of the set up, just looking for these odds and ends.

If you are near by, which more thank likely not, let me know distance from 13045 and might just make a roadtrip out of it.

Let me know, Thanks guys and gals.

i have pretty much everything but you would have to come get them in Quebec

>

Extremely tempting, would you be willing to ship smaller bits at the moment?

I feel like you might need more than what you think you do, i did the conversion on the other side and let me tell you there is a lot of parts that you will need. I also have the harness, all the plastics, the dash, etc.

The firewall though might not be int he best of shape to swap as it has been cut a couple of place around the edges.

If you want to come by and buy everything, i will let you go with everything for very cheap.

I see you are 6 hours from my place, it is a pretty good drive though.