Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #98062

quarter panel rear fender part number - 6G Celicas Forums

Topic #98062 10 posts Started by cellocinema
cellocinema
#1
does anyone know the part number of rear fender(driver side, the one with gas lid)?
i'm looking for a new part, but have no clue what part number it is. i googled it but found only one for 7th gen like below.


Bushmatic
#2
I could be wrong but I don't think that comes as a separate piece. Looking at my car, that piece continues over the door to the roof, like it is permanently a part of the car. Also I've seen someone get hit in this area, and he had to get a bunch of expensive bodywork done instead of just swapping out a fender.

Edit - ignore me! You can indeed buy this separately

This post has been edited by Bushmatic: Nov 7, 2017 - 4:44 AM
QUOTE (TimeslideZ @ Apr 22, 2017 - 4:49 PM)I currently live in MN and have always been a Toyota my whole life.
gallant17
#3
>
QUOTE (Bushmatic @ Oct 31, 2017 - 2:10 AM) *
>I could be wrong but I don't think that comes as a separate piece. Looking at my car, that piece continues over the door to the roof, like it is permanently a part of the car. Also I've seen someone get hit in this area, and he had to get a bunch of expensive bodywork done instead of just swapping out a fender.

you are correct that it all comes as one, what needs to be done to replace a rear quarter of this style is the old section needs to be cut out and the new one welded in so that would be why it was so expensive for the other guy. also i wouldnt imagine you can buy this from toyota it is normally something that is from the aftermarket i have a buddy that works in parts at the local toyota i will phone him and ask if he has the part in the system
96 ST Project09 Corolla-dailyInstagram: Janson1745
gallant17
#4
>
QUOTE (cellocinema @ Oct 30, 2017 - 11:41 AM) *
>does anyone know the part number of rear fender(driver side, the one with gas lid)?
i'm looking for a new part, but have no clue what part number it is. i googled it but found only one for 7th gen like below.



so i did some digging i came up with a part number for the liftback built after january of 96 the number is 61602-2d918 but it is obsolete which i completely expected now thats not too say that maybe some dealer somewhere has it in stock but id say you want to look in the aftermarket somewheres also the list price on it was 1770 dollars canadian so i hope you have deep pockets
96 ST Project09 Corolla-dailyInstagram: Janson1745
njccmd2002
#5
there is a part number, im too lazy to search. it will be expensive.

get a cordless angle grinder, use a cutting wheel head to the yard and cut the piece you need. Weld.
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
gallant17
#6
>
QUOTE (njccmd2002 @ Nov 1, 2017 - 5:56 AM) *
>there is a part number, im too lazy to search. it will be expensive.

get a cordless angle grinder, use a cutting wheel head to the yard and cut the piece you need. Weld.


I cant believe i didnt think of that but of course it is a great idea! (Must be because none of the junkyards anywhere remotely close to my house have celicas in them
96 ST Project09 Corolla-dailyInstagram: Janson1745
cellocinema
#7
thanks for quick response. smile.gif mine is '95 st liftback. is the part number compatible with mine? i remember '94-95 gas lid shape&size is a little different with '96&up.

>
QUOTE (gallant17 @ Oct 31, 2017 - 4:05 PM) *
>>
QUOTE (cellocinema @ Oct 30, 2017 - 11:41 AM) *
>does anyone know the part number of rear fender(driver side, the one with gas lid)?
i'm looking for a new part, but have no clue what part number it is. i googled it but found only one for 7th gen like below.



so i did some digging i came up with a part number for the liftback built after january of 96 the number is 61602-2d918 but it is obsolete which i completely expected now thats not too say that maybe some dealer somewhere has it in stock but id say you want to look in the aftermarket somewheres also the list price on it was 1770 dollars canadian so i hope you have deep pockets

jordisonjr
#8
As njccmd said, best bet is to go to the junkyard with a cutting wheel and cut out of an existing car the panel you need, and then weld it onto your car to replace.
-Protection mode, For when your amp tries to blow its load.1995 Toyota Celica GTS-Daily Driver1999 Chevy Cavalier-Winter Beater1994 Honda Civic CX Hatchback-DeadMy Celica!
richee3
#9
61602-2D210
61602-2D361 W/Mudguard

Same for all liftbacks from ‘94-99, AT200-ST205.
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
cellocinema
#10
thanks. maybe gas lid discrepancy stems from model type, not production year?

>
QUOTE (richee3 @ Nov 2, 2017 - 9:11 AM) *
>61602-2D210
61602-2D361 W/Mudguard

Same for all liftbacks from ‘94-99, AT200-ST205.


This post has been edited by cellocinema: Nov 3, 2017 - 10:13 AM
← Back to Topics