1996 toyota Celica ST hatchback (not bought as an anniversary car)
condition: salvage
cylinders: 4 cylinders
drive: fwd
fuel: gas
odometer: 230000
paint color: silver
size: mid-size
title status: parts only
transmission: manual
type: hatchback
I have a 1996 Hatchback ST, with some good parts available:-
- 1.8 liter motor, runs strong, car had a high front end impact, didn't touch the block. block can be started. ($400.00 singly, $600.00 with the transmission included).
- 1.8 liter matching, manual transmission ($300.00 singly, $600.00 motor included).
IF YOU'RE CONSIDERING A SWAP FROM AUTOMATIC TO MANUAL, I have the parts available on the ST (ALL CAN
BE MOUNTED AND USED ON ANY US VERSION CELICA FROM 91-97) pedal bracket, pedals, connector hardware, master
cylinder, slave cylinder, flywheel, clutch disc (good service life left), pressure plate, throw-out bearing and retainer spring and
all mounting hardware. If you wanting to make the swap, and don't know how, I can be convinced to help, in my garage, for a
small fee.
- All the side and rear metal and glass including drivers and passengers glass and doors (6" speaker brackets have been removed, I
have 8" brackets available).
- Undercarriage (Front Sub-Frame and cross-member) has good metal, but needs almost 100% of the bushings and wear items (including the steering rack) replaced or rebuilt.
(including lower control arm bushings -not sold separately by anyone I am aware of-) replaced.
Thanks for reading.
condition: salvage
cylinders: 4 cylinders
drive: fwd
fuel: gas
odometer: 230000
paint color: silver
size: mid-size
title status: parts only
transmission: manual
type: hatchback
I have a 1996 Hatchback ST, with some good parts available:-
- 1.8 liter motor, runs strong, car had a high front end impact, didn't touch the block. block can be started. ($400.00 singly, $600.00 with the transmission included).
- 1.8 liter matching, manual transmission ($300.00 singly, $600.00 motor included).
IF YOU'RE CONSIDERING A SWAP FROM AUTOMATIC TO MANUAL, I have the parts available on the ST (ALL CAN
BE MOUNTED AND USED ON ANY US VERSION CELICA FROM 91-97) pedal bracket, pedals, connector hardware, master
cylinder, slave cylinder, flywheel, clutch disc (good service life left), pressure plate, throw-out bearing and retainer spring and
all mounting hardware. If you wanting to make the swap, and don't know how, I can be convinced to help, in my garage, for a
small fee.
- All the side and rear metal and glass including drivers and passengers glass and doors (6" speaker brackets have been removed, I
have 8" brackets available).
- Undercarriage (Front Sub-Frame and cross-member) has good metal, but needs almost 100% of the bushings and wear items (including the steering rack) replaced or rebuilt.
(including lower control arm bushings -not sold separately by anyone I am aware of-) replaced.
Thanks for reading.