Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #96791

FS: 96 25th anniversary convertible part out - 6G Celicas Forums

Topic #96791 54 posts Started by bloodMoney
bloodMoney
#1
Alright guys, as I'm getting closer to getting rid of my black vert, I figured I'd offer up parts if anyone needs them.

So, if you're looking for coupe/vert parts, let me know!

This post has been edited by bloodMoney: May 13, 2016 - 10:25 PM
~bloodMoney
pandito
#2
>
QUOTE (bloodMoney @ May 13, 2016 - 10:25 PM) *
>Alright guys, as I'm getting closer to getting rid of my black vert, I figured I'd offer up parts if anyone needs them.

So, if you're looking for coupe/vert parts, let me know!



Do you have the convertible top motors in working condition? And the rear view mirror (my tab thingie doesn't tab).
bloodMoney
#3
The motors both work, I'll need to see about the tab on the mirror.
~bloodMoney
njccmd2002
#4
Too bad far away for spare top!
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
bloodMoney
#5
You wouldn't want it anyway. The forward-most leaf joint broke during the accident.
~bloodMoney
sandusky1977
#6
I could use the rear driver's side window track etc... mine apparently has a bad bushing.
bloodMoney
#7
Rob, I need to look at how the assembly is. The driver's side body took all the impact from the wreck. I just replaced the bushings on the glass, so I know that is still good, but let me take a look at the track assembly is.
~bloodMoney
SexyDexy3
#8
how much for each sun-visor/mirror assembly?


>
QUOTE (bloodMoney @ May 13, 2016 - 11:25 PM) *
>Alright guys, as I'm getting closer to getting rid of my black vert, I figured I'd offer up parts if anyone needs them.

So, if you're looking for coupe/vert parts, let me know!

ClevelandGaint
#9
Would you happen to have the rear windows with the seals in good condition?
bloodMoney
#10
>
QUOTE (SexyDexy3 @ May 17, 2016 - 3:29 PM) *
>how much for each sun-visor/mirror assembly?


>
QUOTE (bloodMoney @ May 13, 2016 - 11:25 PM) *
>Alright guys, as I'm getting closer to getting rid of my black vert, I figured I'd offer up parts if anyone needs them.

So, if you're looking for coupe/vert parts, let me know!



The 'vert sunvisors are different from the coupe/hatch.

Do you need the 'vert ones?
~bloodMoney
bloodMoney
#11
Sunvisors:



Rob: I pulled the window and regulator for you, but forgot to take pics. It all still works. Let me know. I'll post pics for you later.

>
QUOTE (ClevelandGaint @ May 17, 2016 - 3:57 PM) *
>Would you happen to have the rear windows with the seals in good condition?


Sandusky has already asked for the driver's side, but the passenger is still avalable. I'm not sure what you mean by seals though...

~bloodMoney
bloodMoney
#13
I try to get some pictures for you tonight.

Where are you located?
~bloodMoney
bloodMoney
#15
Bump it up!

Top motors, Sunvisors, Quarter windows are still available




Did I mention this car has a black leather interior?
~bloodMoney
bloodMoney
#16
I also have a set of SSR Type C 17x8 et+35 that I'm looking to get rid of...





These are hard to find in 5x100, and they were refinished in 2013 (second pic). There are no marks, bends, or rash on these!

They have a set of 225/45/17 Riken Raptor tires on them that have about 40% life left.

$1200 plus shipping
~bloodMoney
955SFE
#17
How are the fenders? Any side skirts?
bloodMoney
#19
>
QUOTE (955SFE @ Jun 22, 2016 - 12:07 PM) *
>How are the fenders? Any side skirts?


The fenders look straight until you put them on the car. The headlight area is going to need a little massaging to get them back to 100%

The sideskirts are just the little black ones that come standard on the 'verts.

~bloodMoney
ClevelandGaint
#20
How are window seals on the quarter windows? I would be interested in both shipped to 44144
955SFE
#21
>
QUOTE (bloodMoney @ Jun 23, 2016 - 7:26 AM) *
>>
QUOTE (955SFE @ Jun 22, 2016 - 12:07 PM) *
>How are the fenders? Any side skirts?


The fenders look straight until you put them on the car. The headlight area is going to need a little massaging to get them back to 100%

The sideskirts are just the little black ones that come standard on the 'verts.




What about the passenger fender?
bloodMoney
#22
>
QUOTE (ClevelandGaint @ Jun 23, 2016 - 7:32 AM) *
>How are window seals on the quarter windows? I would be interested in both shipped to 44144


The quarter windows didn't leak before the accident, I'm not sure which seal in particular you are talking about, but both quarter windows are available.


>
QUOTE (955SFE @ Jun 23, 2016 - 11:53 AM) *
>What about the passenger fender?


I have a white passenger fender that came off the other car. I'm not sure if the headlight area will need massaging like the driver's side does.

This post has been edited by bloodMoney: Jun 27, 2016 - 8:39 AM
~bloodMoney
CelicaDICE
#23
What about the emlbem that goes onto the front Fenders? What is the current condition on them?

This post has been edited by CelicaDICE: Jun 27, 2016 - 8:41 AM
Rare JDM Dealer Option Parking(Proximitiy) Senor for salehttp://www.6gc.net/forums/index.php?showtopic=97051
bloodMoney
#24
There are no emblems on the fenders. The good fenders went onto the car that I'm keeping.
~bloodMoney
MegaMac
#25
Heya!

What sort of seats does the 'vert have? If it has the black Classic Soft Trim seats then I'd definitely be interested in buying just the covers. Mine are getting to be pretty rough in shape. Other than that, would you be parting with the oem floor mats if you have them? I'm looking for some of those as well.

Last thing would be some pretty small parts. Would you happen to have the door fasteners/pegs that go on the side of the door panels? Should be three on each side. If you have them to spare, I'd like 'em. Other part would be one of the two 10mm hex screws that hold the relay box in place. Misplaced one of them while replacing my alternator so I'd like to have both again. lol
bloodMoney
#26
>
QUOTE (MegaMac @ Jun 30, 2016 - 1:21 PM) *
>Heya!

What sort of seats does the 'vert have? If it has the black Classic Soft Trim seats then I'd definitely be interested in buying just the covers. Mine are getting to be pretty rough in shape. Other than that, would you be parting with the oem floor mats if you have them? I'm looking for some of those as well.

Last thing would be some pretty small parts. Would you happen to have the door fasteners/pegs that go on the side of the door panels? Should be three on each side. If you have them to spare, I'd like 'em. Other part would be one of the two 10mm hex screws that hold the relay box in place. Misplaced one of them while replacing my alternator so I'd like to have both again. lol


The extra interior is black leather. I'd rather not have to pull the covers off them, seeing as how people always seem to be looking for black leather interiors (yet, there are none in this thread...)

The car has no OEM floormats, so I can't help you there....

If you can PM me a picture of the door fasteners, it would help me to know if I have extras.
~bloodMoney
MegaMac
#27
>
QUOTE (bloodMoney @ Jul 1, 2016 - 1:29 PM) *
>>
QUOTE (MegaMac @ Jun 30, 2016 - 1:21 PM) *
>Heya!

What sort of seats does the 'vert have? If it has the black Classic Soft Trim seats then I'd definitely be interested in buying just the covers. Mine are getting to be pretty rough in shape. Other than that, would you be parting with the oem floor mats if you have them? I'm looking for some of those as well.

Last thing would be some pretty small parts. Would you happen to have the door fasteners/pegs that go on the side of the door panels? Should be three on each side. If you have them to spare, I'd like 'em. Other part would be one of the two 10mm hex screws that hold the relay box in place. Misplaced one of them while replacing my alternator so I'd like to have both again. lol


The extra interior is black leather. I'd rather not have to pull the covers off them, seeing as how people always seem to be looking for black leather interiors (yet, there are none in this thread...)

The car has no OEM floormats, so I can't help you there....

If you can PM me a picture of the door fasteners, it would help me to know if I have extras.



I actually have no idea what the original fasteners look like (maybe someone here does?) All I know are the location of them. If they're there along the sides of the doors, maybe you could remove them?

One other thing I thought of would be the driver side mirror/window/etc control panel, if you have an extra in good shape.

I'm also not quite sure what you mean by the seat cover comment. You'd rather not pull them off due to people looking for them? Seems like it'd be a prime time to sell. I'm right here! lol Although I would like to confirm the type of seats. Do yours look like this?: https://s25.postimg.org/7jw8ip533/Driver_Co...pg_original.jpg
bloodMoney
#28
I can take a look on the fasteners and let you know.

I know I do not have an extra master window switch, it was lost in the accident.

In regards to my statement on the seat covers, my preference is to sell the seats whole. I'm trying to free up space in my basement and selling only the covers does not help my cause.

This post has been edited by bloodMoney: Jul 5, 2016 - 9:01 AM
~bloodMoney
Zaluss
#29
Interested in the shifter. Just the actual shifter and not the entire assembly though I'd understand if you would want to sell it as a whole assuming this is a manual.
bloodMoney
#30
Sorry. It's an automatic.

But there is a guy parting out an anniversary hatch. I'm pretty sure he has he manual shifter assy.

http://www.6gc.net/forums/index.php?showtopic=96337

Jon is a great guy, I've done lots of business with him previously.

This post has been edited by bloodMoney: Jul 6, 2016 - 6:15 PM
~bloodMoney
← Back to Topics

Page 1 of 2 (54 total posts)