I plan on getting xx530 wheels very soon
For the fronts im getting 18x8.75 +33, according to the flush fitment guide these wheels will be nearly perfect.
My question regards to the rears. I want to get 18x9.75 + 20. Im sure they'll clear the strut (coilover) but not sure about the quarter panel. Flush fitment guide says with 10inch wheels you need +30, Im assuming 10mm wont make much of a difference but what do I know. I was hoping I could run stock camber and didnt want to have to stretch the tires at all. Any help is appreciated
For the fronts im getting 18x8.75 +33, according to the flush fitment guide these wheels will be nearly perfect.
My question regards to the rears. I want to get 18x9.75 + 20. Im sure they'll clear the strut (coilover) but not sure about the quarter panel. Flush fitment guide says with 10inch wheels you need +30, Im assuming 10mm wont make much of a difference but what do I know. I was hoping I could run stock camber and didnt want to have to stretch the tires at all. Any help is appreciated
QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM)I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league.