Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #94773

Need replacement BEAMS 3SGE crank. Replacement question (HELP) - 6G Celicas Forums

Topic #94773 8 posts Started by ST204BEAMS
ST204BEAMS
#1
Hey 6gc,

So after months of working on my BEAMS swap i finally got it running only to find out that it has a REALLY bad knock frown.gif. Quite the spirit breaker you might say... So now i am looking for a replacement crank and possibly rods for the BEAMS redtop 3S-GE. Now i found a company that sells re-manufactured cranks, and they sell the crank for the 1st Gen 3S-GE or the 2nd Gen 3S-GTE. So the question is are there any differences in the cranks? or am i okay to use one of these as a replacement for the crank in my BEAMS 3rd Gen 3S-GE??

Here's the site im looking at: http://www.northernautoparts.com/ProductDe...?ProductId=3258

Thanks in advance!

njccmd2002
#2
you would be better going to mr2.com and get a real beams crank. oh just remember the gasket set is 400 from japan, and takes 6 weeks.
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
ST204BEAMS
#3
>
QUOTE (njccmd2002 @ Dec 17, 2014 - 6:43 PM) *
>you would be better going to mr2.com and get a real beams crank. oh just remember the gasket set is 400 from japan, and takes 6 weeks.


Are you suggesting i hunt around on the classifieds and see if anyone has a spare BEAMS crank for sale?

Could you please point me in the right direction as to where to get the gasket kit?

Thanks!
BonzaiCelica
#4
Hold your horses. He says 6 weeks because it's a special order part 95% of the time. Let me ask a friend of mine overseas. But before doing that. Go here and bumper this thread. The member hasn't signed in, in 4 days

http://www.6gc.net/forums/index.php?showto...79272&st=80
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
njccmd2002
#5
http://www.mr2.com/forums/forums/193-Beams-Parts-Swap
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
ST204BEAMS
#6
>
QUOTE (BonzaiCelica @ Dec 17, 2014 - 8:18 PM) *
>Hold your horses. He says 6 weeks because it's a special order part 95% of the time. Let me ask a friend of mine overseas. But before doing that. Go here and bumper this thread. The member hasn't signed in, in 4 days

http://www.6gc.net/forums/index.php?showto...79272&st=80


Will a black top Beams gasket kit work just the same??

Thanks for all the help guys! Appreciate it
BonzaiCelica
#7
btw your engine is a 4th gen 3sge.
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
ST204BEAMS
#8
>
QUOTE (BonzaiCelica @ Dec 17, 2014 - 11:51 PM) *
>btw your engine is a 4th gen 3sge.


My mistake lol, yes its a 4th gen '98 3S-GE

Thank you for that correction
← Back to Topics