Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #92483

5sgte rwd conversion - 6G Celicas Forums

Topic #92483 161 posts Started by toy8490
toy8490
#121
I've swaped to a r150, comes out of a 96 tacoma v-6 2wd, had the whole thing rebuilt, Now i'm having a extended shift housing built, This is what it should look like when it is finished. I've been having problem shifting because, i had a different shift extention, And lets just say that didnt work to well, It has effected my drag time alot.



This post has been edited by toy8490: Jan 14, 2016 - 3:36 PM
toy8490
#122
Here is a picture of my old shifter extention setup that i tryed out.
It did shift gears, but not fast, Its like you had to wait for the gears to line up then shift, And i could watch the spring come up, Over all it was not working out


njccmd2002
#123
That was rigged! Im glad this project lives on
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
toy8490
#124
I'm looking for any subsections for a catch can? I want to install one, let me know what others have done, Thank you
njccmd2002
#125
like an oil catch can? lol.. antything you want... tigawoods post has one..

my 2tc has a plastic nos bottle to catch.

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
BonzaiCelica
#126
Yourh ability reminds me to that of czwalga, truely a 6gc Pioneer like your self

This post has been edited by BonzaiCelica: Jan 19, 2016 - 12:37 PM
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
toy8490
#127
Just ordered a bunch of stuff, 2200cc Bosch Fuel injectors, Bigger Fuel rail using 8an fittings, Flex fuel sensor, and 1/2 fuel hose that will handle e85, Then next month i'll be ordering Megasquirt ms3 pro, so that i can use all these goodies.
trdproven
#128
interested to see this continue, my friend just built a 7th gen celica RWD with a 2JZGTE.
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
toy8490
#130
I've been running a 58 mm china turbo, i'm tuned to 30 + boost. Running e85. 2,200 injectors, 044 fuel pump. I'm out of fuel pump now, and will be doing some changes. I have done new 4 link suspension out back with a ford 9 inch all aluminum housing, 3.90 gears, Changed out my 5 speed manuel with a GM turbo 400 automatic with transbrake. Using BTE racing custom built race torque converter stall 4,800 rpms.

I have a new 76 MM china turbo that i'll be installing shortly, and a MagnaFuel ProTuner 750 Series In-Line Fuel Pumps MP-4303 fuel pump.




















This post has been edited by toy8490: Jun 28, 2017 - 4:49 PM
Ghost010
#131
This is probably one of the best builds I have ever seen!!!
toy8490
#132
>
QUOTE (Ghost010 @ Jun 30, 2017 - 10:00 AM) *
>This is probably one of the best builds I have ever seen!!!

Thanks
toy8490
#133
Well I have taken this 5sgte 76mm turbo as far as it will make with stock 4th gen camshafts. Made 483hp to the wheels on the dyno. at 35psi.
I need to let it breath. Tell me what people recommend for cams?
It is becoming a full race Drag car.
richee3
#134
That’s a seriously impressive number.
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
cheela
#135
>
QUOTE (toy8490 @ Apr 17, 2014 - 2:14 PM) *
>This 4 cylinder that i'm building will be lighter than a 6 cylinder. And i'm building a 5sgte, I plan on making 400-500hp with this engine.


and surprisingly you're exactly where you said you'd be. very nice numbers!
*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.
toy8490
#136
I have new numbers, still with the stock cams on the 4th gen head. Made 551 who 40 psi
NgoFcukinWay
#138
went through the thread and I don't think I saw it mentioned, but have you cracked the motor open to upgrade the internals or are you still on factory internals?
-Alex {](O_o)[}1993.5 Toyota Supra....with stuff........sorta broken....1998 Toyota Celica....this one, too, has stuff........broken....yeah...definitely broken....
toy8490
#139
Its a fully built motor.
cheela
#140
too bad that GTR didn't get a good launch. Would've been nice to see you go head to head with it.
*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.
toy8490
#141
The GTR did get a 1/4 mile time 11.6, My celica was at 9.22
SwissFerdi
#142
That thing ****s.
'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE
toy8490
#143
Fixed my fueling problem with a larger feed hose.
Now i have a traction problem. Over the winter i'm going to loose weight off the front end, and transfer weight to the rear. Then redo my suspension bar links mounting positions. Buy summer again. I want to get this car into the 8's

Link below is with the fueling fixed , and as you can see my traction problem

https://www.youtube.com/watch?v=6ctYbpCkedc
TimeslideZ
#144
You ever thought about a one piece front end? Could make it out of fiberglass to help reduce the front weight.
ricochet1490
#145
:slow clap:

Hard to believe all that out of a 4cyl. Can't believe the block is holding together.
toy8490
#146
>
QUOTE (TimeslideZ @ Dec 4, 2018 - 12:23 AM) *
>You ever thought about a one piece front end? Could make it out of fiberglass to help reduce the front weight.

I just bought a aluminum gt4 hood along with the bumper. I also have install light weight drag brakes, and i have bought a Chromoly K membler with control arms. All of this will be removing some serious weight.

>
QUOTE (ricochet1490 @ Dec 4, 2018 - 5:03 PM) *
>:slow clap:

Hard to believe all that out of a 4cyl. Can't believe the block is holding together.


3sgte do crack blocks. I have a 5s block. There good for 1,000hp.
Smaay
#148
BEAST MODE, that car is awesome
2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac
toy8490
#149
update,, The car is at 2450 lbs with me in it. Adjusted rear suspension, tuned the motor, entered my first race this year at import face off, Off the trailer the car went straight with a little bit of wheel spin on the launch , 2nd and 3rd gear to the floor. Pulled the shoot, at the end. Made my record pass of this car 8.6 at 172 mph. I qualified as fastest in my class... The event is Import Face off,,, My class is Forced Induction Pro. 1st race was up against a AWD honda civic,,,, Won that race,,,, Next race Nissian Gtr,,,, Won that race,,,,,, Then a Bmw with Twin turbos,, Won that race,,,,, Won my class Placed 1st, Won a big Trophy and $1,200 .

Here is my you tube videos of the event

https://www.youtube.com/watch?v=gRAlT0BU1o4 1st qualify pass record pass 8.6 172mph

https://www.youtube.com/watch?v=q0DB2_1kqBQ I get a bye run because i was the fastest qualify pass

https://www.youtube.com/watch?v=ubWNG4F92eY 1st race of the event against AWD honda civic,, I Won

https://www.youtube.com/watch?v=-mbddywLlrQ 2nd race of the event against a pretty quick Nissan GTR,,, I won

https://www.youtube.com/watch?v=HpJKezzg7p8 Final round of the event against a twin turbo BMW,,,,, I won








slavie
#150
Nice job. Show 'em how it's done.
← Back to Topics

Page 5 of 6 (161 total posts)