I'm hoping someone with previous experience installing these can help me out please,
I received my risers a few days ago and started working on them today, however after taking the spoiler off I see nothing matches up..

I'm aware the block and the spoiler wont match and new holes need to be drilled,

but the block and the bottom of the car do not match up anywhere, I tried taking photos best I can resting the blocks in position

Here is how the risers look upside down on the spoiler (not mounted)


The riser over hangs over the boot (as they all do, and i took a photos in that gap..


So you can see the mounting hole on the block are like 1cm from the boot

then the mounting hole can be seen on the right from the boot far away from everything


Anyone experience something like this when installing? or am I missing a piece
Any help would be appreciated thanks

Hmmm...your risers look like they're missing the bottom piece to them, that might be why they aren't lining up at all. This is the best picture I have of mine but you can kind of see that they have a whole bottom part to them.

Ok so its is a missing peice..
there is no way to drill in the blocks to attach the spoiler aswell so tomorrow I am grabbing some Fibreglass filler and filling up the whole block

I hope you didn't pay full price for those?...

yeah, there's no way to attach it without that bottom piece

The bottom piece holds 2 nuts fiber glassed in place to match the stock holes. And the wing has 2 holes punched ready to be drilled to match up with the riser blocks upper half. If i didn't have mine on with weather strip sealant and double sided tape i would remove them and show you.

Here you should be able to see:

Top half

Bottom half


Yours my friend is......£*%<£)!

Have those blocks been carbon skinned yellowchinaman?

If anyone is interested..

I've got some brackets that I made to match up the bottom of the risers and bolted them to the block then put rubber on the bottom and going to seal it for it to be weather proof then I just need to drill the correct holes for it to fit the car,

but thank you for the replies, searching around its hard to find photos of a bottom of a riser and this helps me grasp how to mold mine

>
Glad you figured something out can't wait to see how they turn out

Filled, primed and crack free. It's attached to the spoiler and just needs to be attached to the car!
Oh.. and painted haha

You did good

thank you, so much effort tho haha

as much as I love working on these I'm finding no time to do it

How'd you manage to make it work out?

I shall take photos today!

>

Lies.

haha yeah I thought i'd work on them but sadly i've had no time, However!...
After I finish some stuffs this morning I hopefully get the afternoon to work on them.. THEN I shall post photos

Possibly lies and forgot to post or just LIES!

Haha no actually I wrote on the Today I... thread that instead of continuing work on the risers I picked up a set of sideskirts from the wreckers instead



But! -- I have tomorrow off and I SHALL work on them! It's a guarantee

Well that's a lie, I have errands to run

This post has been edited by RoadRage: Mar 31, 2014 - 6:48 PM

im looking to buy some riser blocks for my celica...