>
QUOTE (Kev6GCTH @ Jan 28, 2014 - 11:51 AM)
>Today. I did the same thing with customer's car.
Yellow ST202 ,original super strut, but very poor maintenance.
All ball joint are loose, front wheel bearing NG, and all super strut component are loose.
Today just finished rear side. I replace all 4 arms with solid rubber bushing type.
Tomorrow I will replace wheel bearing and super strut components.
did u get bushings from poland?
any ways. today is done, and this is left to tackle another day, between torches, and impact gun, and large bar
the rest will soak overnight in pb
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
Im 24 and Im sure it would be my dream lol. I love it and just getting another celica beater again too. Ive always loved the turbos, but they never come around. And I dont feel like shelling out the bucks to buy one though either just for a beater. There is 10 on craigslist right now for 1000-2000 depending on if you want the 1.8 or 2.2
I like the progress already. Keep it up!
94 Teal GT-DD 223,915 miles SOLD99 WHT GT- Race car! Or just AutoX Car getting rebuilt then susp and turbo!
Poland's bush? No, I bought it locally.
Shipping cost from EU & import tax may kill me!!
st205 powered ss3 coupe
well with a map pro torch, cuz propane sucks.
i drilled one side of the bolt, and heated the other side cherry red, and with a very convincing hammer,,
the bolt is out....
now unto the other side...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
Great work as always! Is there a part number for the bolt?
The "Fly Low" Project: 3rd Gen 3SGTE
Yes, once i get the order ill post the numbers, its better just to pre order the bolts to avoid downtime
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
so a pretty good weekend... because got stuff done, i dont recommend this by the average DIY, if you have no good tools you can be SOL...
for the arms, this was the problem... getting the rubber out was ok, but the metal sleeves were also frozen... so
basically i use a saw to cut inside and weaken the sleeve
and press it out.. i tried just pressing it out, but it was not working.. i kept slipping...
and here it is..
then i marked each piece so i remember where it goes. kinda braille (see those 2 dots)
at the end of the day, today, all pieces were ready for treatment... after fighting with the last frozen bolt in the spindle
in between, i took the chance to finish the seats in the rear... i dont reuse the hog pins, i keep very JDM, zip ties...
'
yes some pop corn is good.... and then after some scotch guard spray.. they look clean!! have to do the driver seat...
no rush to work on the suspension, as the bolts have not even shipped yet.....
at the end of the day, damage to the press...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
>
QUOTE (Fate @ Feb 1, 2014 - 6:39 PM)
>Great work as always! Is there a part number for the bolt?
From toyodiy
90901-09001 two long bolts to connect to subframe
90901-19001 two long bolts for the hubs
90179-14019 four nuts for the bolts above
Associated washers
90201-14017
90560-14022
st205 powered ss3 coupe
my st205 swapandour Beams swap
Wow. What size socket did you use to press out the sleeve?
And how did you damage the press like that?
~bloodMoney
lol, it was a 24 mm, i should have used a 25 mm or 26mm. I just opted not to get one. (i should have) . The press is a harbor freight press, and their reviews are bad in a way, i guess i expected for it to happen. But not that fast. the damage happened before i figured out to cut the sleeves, then heat them and press them.
I tried to press the sleeves from the get go, and it was not possible, they were seized so bad, i guess too many winters...
its been 1 1/2 week donwtime, since weather, work and waiting for parts. I should have planned this different, but i have a daily driver.... and the vert still drivable, although missing most of the interior now.
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
are any of your cars ever in one piece? lol!
keep up the good work Berto.
*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.
as a matter of fact, no! LOL, its a baaaaad habit!....
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
Hey, we have matching seats. Your car is a much nicer colour though.
2001 Miata LS 5-speed
Fantastic work! Glad its getting the care it needed.
ScottWest Michigan
lol welcome to my world. I have 5 cars and only 3 of them run. All-trac still needs paint and engine re-installed. Supra is making a funny noise
2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac
i know, its bad, bad...
1973 corona, bad carburator and needs carpet changed...
1976 celica on rotisserie chassis only
1978 corolla, not running burned harness
1996 celica, no rear suspension
1997 convertible no interior.
1983 honda motorcycle, in a box.... lol, i have not done the frame yet...
i literelly have minimal space in garage, and also rent a 10x40 storage room....
so people dont beleive when i wont modify the STI, i just wont...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
>
QUOTE (Ted95 @ Feb 2, 2014 - 11:30 PM)
>>
QUOTE (Fate @ Feb 1, 2014 - 6:39 PM)
>Great work as always! Is there a part number for the bolt?
From toyodiy
90901-09001 two long bolts to connect to subframe
90901-19001 two long bolts for the hubs
90179-14019 four nuts for the bolts above
Associated washers
90201-14017
90560-14022
thank you Cam!
how many washers of each though?! (being lazy)
The "Fly Low" Project: 3rd Gen 3SGTE
about 4 per bolt, but if you are careful, you can reuse the ones you had.
the 90901-09001 will usually not be damaged and is the most expensive one.. its usually never rusted...
i ordered..
90901-19001 holds the spindle to the control arms..
90119-12131 for the lateral arms..
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
the yard, and its many surprises.. lol
got a new foam, because well
see...
and now the seat is cleaned and scotchguarded...
thats the upper section of the passenger on the driver.
went from trimming the edges
to applying some glue...
to fitting my new custom made cover...
not bad for the first time..
its been to cold to work...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
seat cover has a hole...
repaired...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
my st205 swapandour Beams swap
the benefits of having a sewimg machine, and knowing how to use one.
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
ok, i know some of you dont care, but there is a reason for all..
today i cleaned and baked cookies...
and here are them baking under heating lamp
finally got around to installing the pass seat, that was repaired...
of course after throwing new set of carpets...
my camera died, so all i have is crappy cell phone pics...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
Those arms look great.
That knob has seen better days,
my st205 swapandour Beams swap
36 hours for paint to cure, but its chip free they say
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
more cookies today...
and these suckers are going for a second round of blasting.
soaking overnight with "must for the rust" which is a phosphate solution, 30 min each knuckle, and the rust was like, tough...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
pulled out the big sandblaster today, what beautiful weather... 65 degrees outside...
then baked the cookie....
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
I think you're burning all of your cookies. They're all turning out black.
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
