other than the celica st hubs, are there any other hubs i can use from other toyota vehicles?
hub options - 6G Celicas Forums
yes the camry hub, and convert to 5 x 114.3
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
what year camry? same vintage as the celica or can it the 97-2000 camry as well?
>
Im going to do the conversion soon also. Here's the how to link for it.
http://www.6gc.net/forums/index.php?showtopic=80878
QUOTE (njccmd2002 @ Jan 15, 2014 - 8:56 AM) 
>yes the camry hub, and convert to 5 x 114.3
Im going to do the conversion soon also. Here's the how to link for it.
http://www.6gc.net/forums/index.php?showtopic=80878
Silly97 ProgressDirtBag87 ProgressCalifornia Members Check In
I think he's wanting to stay 5x100 and get a replacement hub, not do a conversion.
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
If you don't want a conversion then Celica only. Maybe corollas but not sure.
Silly97 ProgressDirtBag87 ProgressCalifornia Members Check In
im guessing theres some work to be done in the conversion
well in that case, just celica... part numbers on toyo, list some japanse curren, corona, and caldina... but these are the same..
why do you need one?
why do you need one?
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
i need two for both sides and looking for the motor mounts. my celi is sitting at home getting a new rack and pinion installed and i might as well get everthing fixed while im at it. pepboys, autozone and advance auto dont have the hubs so.im looking for alternatives or see if anyone has em here
>
>
Since you're already replacing the hubs. I'd suggest just doing the conversion. The conversion is all bolt on. No mods are needed. The only mod you need to do is to press the front hubs out but either way you're still going to need to do that to replace the hub. Lol. Might as well do the conversion.
QUOTE (Fuzzyfo @ Jan 15, 2014 - 12:25 PM)
>im guessing theres some work to be done in the conversion
>
QUOTE (Fuzzyfo @ Jan 15, 2014 - 3:05 PM)
>i need two for both sides and looking for the motor mounts. my celi is sitting at home getting a new rack and pinion installed and i might as well get everthing fixed while im at it. pepboys, autozone and advance auto dont have the hubs so.im looking for alternatives or see if anyone has em here
Since you're already replacing the hubs. I'd suggest just doing the conversion. The conversion is all bolt on. No mods are needed. The only mod you need to do is to press the front hubs out but either way you're still going to need to do that to replace the hub. Lol. Might as well do the conversion.
Silly97 ProgressDirtBag87 ProgressCalifornia Members Check In
okay how about money wise? will the conversion cost as much as replacing them or a little more costly?
>
Its all the same process. I'd expect to pay the same. Only thing is...if you don't have 5x114 rims then you need to go get a set.
Actually. I take that back. It costs about 150-250 more to do the conversion on your case. Since you'll need to buy new 5x114 rotors. But the total costs that I'm looking at for my conversion. Is roughly $500 for labor cost and parts.
This post has been edited by ILoveMySilly97: Jan 16, 2014 - 12:38 AM
QUOTE (Fuzzyfo @ Jan 15, 2014 - 3:22 PM)
>okay how about money wise? will the conversion cost as much as replacing them or a little more costly?
Its all the same process. I'd expect to pay the same. Only thing is...if you don't have 5x114 rims then you need to go get a set.
Actually. I take that back. It costs about 150-250 more to do the conversion on your case. Since you'll need to buy new 5x114 rotors. But the total costs that I'm looking at for my conversion. Is roughly $500 for labor cost and parts.
This post has been edited by ILoveMySilly97: Jan 16, 2014 - 12:38 AM
Silly97 ProgressDirtBag87 ProgressCalifornia Members Check In
maybe later down the road i'll do the conversion but right now i just need to get my celi running again. you think hubs from a 90-93 celica st would work?
>
They should work. Why you changing the hubs? They usually don't go bad. just the bearing.
QUOTE (Fuzzyfo @ Jan 16, 2014 - 3:34 PM)
>maybe later down the road i'll do the conversion but right now i just need to get my celi running again. you think hubs from a 90-93 celica st would work?
They should work. Why you changing the hubs? They usually don't go bad. just the bearing.
Silly97 ProgressDirtBag87 ProgressCalifornia Members Check In
apperantly my hubs are broken. the bearings are good but the hubs are shot 
and its only the right side hub but i might as well change both
This post has been edited by Fuzzyfo: Jan 16, 2014 - 8:21 PM
and its only the right side hub but i might as well change both
This post has been edited by Fuzzyfo: Jan 16, 2014 - 8:21 PM
>
That sucks. Well too bad I'm not doing my conversion yet. I would've sold it to you. Lol.
QUOTE (Fuzzyfo @ Jan 16, 2014 - 5:20 PM)
>apperantly my hubs are broken. the bearings are good but the hubs are shot and its only the right side hub but i might as well change both
and its only the right side hub but i might as well change bothThat sucks. Well too bad I'm not doing my conversion yet. I would've sold it to you. Lol.
Silly97 ProgressDirtBag87 ProgressCalifornia Members Check In
I also had to replace the hubs on my celica , after pulling
a set off my parts car to find out that they we also bad. The metal on the hub where the inner race contacts the hub wears down then
the hub doesn't fix tightly inside the bearing. long story short partsgeek.com has oem hubs cheaper than anybody else.
partsgeek.com are the cheapest hubs I could find , and when the arrived it was great to find out that they were oem
a set off my parts car to find out that they we also bad. The metal on the hub where the inner race contacts the hub wears down then
the hub doesn't fix tightly inside the bearing. long story short partsgeek.com has oem hubs cheaper than anybody else.
partsgeek.com are the cheapest hubs I could find , and when the arrived it was great to find out that they were oem
If the hubs are bad, your bearings will most likely be gone/have signs of wear as well.
-Protection mode, For when your amp tries to blow its load.1995 Toyota Celica GTS-Daily Driver1999 Chevy Cavalier-Winter Beater1994 Honda Civic CX Hatchback-DeadMy Celica!
There is a bit a of chicken and the egg thing with the hubs and bearings... essentially wear in one will quickly wear out the other and they will destroy each other... you can try some junk yard cars but considering the price of *good* bearings (Timken, etc) you might want to fall on the grenade and get brand new hubs... the key is to get brand new axle nuts (there is a TSB on it) and make sure you keep those torque to spec.
-Mikemjcoury@gmail.comTeam Reynolds StyleCelica BlogCelica WikiIt will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work.
I've got a good set sitting in my basement. Nothing wrong with them just took them off to convert to 5x114.3 lug pattern. Pm me if your interested. I'll let the set of 2 go for $85 shipped
1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition