I was just taking a gander at the article on installing coilover/springs and a question arose in my mind. If I want to lower my car about 1"-2" which would be my best option? Go with the coilover kit, or use lowering springs. I want to do this in the next couple of months and I would really apreciate some input. Thanks
Coilover/lowering springs - 6G Celicas Forums
Do you want to be able to pick/change spring rates? That and the ability to change right height and therefore corner weights are the only differences between lowering springs and coilovers.
i recomend springs. when i revamp my suspension i'm goin to get some eibachs and toss my gorund controls. i just dont need to go lower than 2" or be able to adjust my height.
cormudgen
cormudgen
Because GCs are $400 and springs are much cheaper. Some people don't care that much about suspension.
not to mention grounc controls have a worse ride due to a diff spring/spring rate as well as make notorious "popping noises". also i can se these and mabe make $50 and still give a fellow 6th genner a great deal on The best set of affordable coilovers for our car.
cormudgen
cormudgen
you lower your car and get stiffer suspension, the ride is gonna be ****. You might as well be able to rip around corners, instead of having a ****ty ride and turn a little faster.
im all for springs...a great combo if you do not want to go so low is the Eibach Sportlines and just get yourself some Koni yellow struts. and your set
-SpedToe169+Jan 28, 2004 - 12:18 PM
-SpedToe169+Jan 28, 2004 - 8:54 AM