Hi guys. Fitting a hawk universal remote locking system. Sussed out the door polarities etc so 99% confident wiring this in but.....need to know where to take a permanent live from? Hawk have told me the white thick wire in the steering column but the only thick wire is white and black, I dont think this would be a perm live anyway? any ideas appreciated. I did use the search before some wise ass replies with that looks like there is a thick white going into the back end of the ignition barrell.....99 st btw. Thanks in advance

Here I found a quick cheat sheet for basic wiring, I also installed an alarm a year ago so I can say it's correct as far as I can remember it...
It says WHITE or BLACK/RED from the ignition harness, because 12V constant voltage is on both wires. But you can easily make sure which wire does what with voltmeter.

>

You're a star my man, thank you. That cheat sheet is gonna come in handy