Over 1M Posts • 84K Topics • 9K Authors

Aftermarket (Momo) Steering Wheel Installation - 6G Celicas Forums

Topic #90067 8 posts Started by Red123
Hello guys.
If I buy this steering wheel, will it be easy to install? Any ideas? Have you done that?
>
CODE
>http://www.ebay.com/itm/JDM-NISSAN-SILVIA-S14-ORIGINAL-MOMO-RACE-GOLDEN-STEERING-WHEEL-OEM-/271112987199?hash=item3f1f97e23f&vxp=mtr>
>


Thanks

This post has been edited by Red123: Jul 8, 2013 - 5:28 PM

FBMay 2015 COTM
I have the same one in my car, sadly I was not the one to install it and I can't be of any assistance.

Can't be that hard. smile.gif
Check this out http://www.youtube.com/watch?v=0zmz2EBBoAA

FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
>
QUOTE (The_enD @ Jul 8, 2013 - 6:31 PM) *
>I have the same one in my car, sadly I was not the one to install it and I can't be of any assistance.

Can't be that hard. smile.gif
Check this out http://www.youtube.com/watch?v=0zmz2EBBoAA

thanks mate.
very informative video.
but will that hub fit on celica? or is it universal for all jdm cars?


FBMay 2015 COTM
I am not sure, so I won't say YES and mislead you.

FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
As the seller wrote to me, they are car specific.
>
QUOTE
>This hub will only work on s14

FBMay 2015 COTM
If you like the steering wheel a lot(condition,color, etc.) and the price is good you can try and search for a hub that will fit the Celica.
Maybe even sell the S14 hub and get some money back.

FS thread :Custom Celica partsmade to order + moreClick the image to visit my FB page
Whatever you do, don't get an eBay hub. I got a steering wheel from eBay and while the wheel itself is awesome, the hub is a piece of crap. The steering wheel wiggles around before tightening down the shaft nut. It shouldn't be like that. I can hear the steel splines eating through the cast aluminum from the hub.

Anywho, get a good hub. They go for less than or around $100.

1993 Celica GT Coupe - sold1994 Celica GT Liftback
P.S. It's quite easy to install. You need a Torx T-30 bit, a phillips head screwdriver and a 19mm socket and ratchet. A steering wheel puller is a good idea but isn't necessary. Make sure you wiggle your steering wheel side to side like you're trying to bend it. Leave the shaft nut on but backed out most of the way.

1993 Celica GT Coupe - sold1994 Celica GT Liftback