I blew coil pack on cylinder 3 and need the cylinder head rethreaded. i need a bare cylinder head or even better yet with the valves already in place that way i don't have to sit valves when i take off the head.
nonetheless let me know what you have im crunching for time.
This post has been edited by BonzaiCelica: Sep 10, 2013 - 5:49 PM
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
This isn't good, man. I'm so sorry! I've still got that seal kit lying around if you need one.
lets see, parts 1000 bucks, seals 400 bucks, labor 70 bucks an hour, machine shop 350.
sorry bro, better off buying a new engine... If it was me, id do that... and sell the bits that are not needed...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
Only the crankshaft and rod bearing and piston rings would cost around $ 360 without shipping to the us.
When the rods are gone add about $145 a rod. Pistons (0.5 OS) $80 a piece. Engine overhaul gasket kit, add another $300, etc etc.
From my experience i can tell that when you've opened the engine you think like this: "hmm the engine is open why not replace this at the same time. Wait this is easy to change also now when it's open, etc etc."
I did a complete Blacktop rebuild myself (parts are comparable regarding the price) and only for rebuilding parts it costed me somewhere around the $1800 mark. With all the labour (like cleaning the engine, hone the cylinders, etc) i think it'd be somewehere around $2200.
So it's somewhat expensive the SS3 parts.
By the way the prices are all for OEM parts.
If you need anything you can always email me. I get the parts directly from Japan.
My 7AFE to 4AGE 20V Blacktop conversion!
it would be cheaper to buy another engine and part out the bits, and bits from yours...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
anybody have extra coil packs lieing around perhaps a new valve cover gasket and spark plug seals with a new head gasket let me know thanks
This post has been edited by BonzaiCelica: Jul 25, 2013 - 12:23 PM
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
If you need anything (new OEM parts), you can send me a pm. I'll give you a price for the parts and shipping.
My 7AFE to 4AGE 20V Blacktop conversion!
toyodiy says caldina st215 coil plugs are the same so let me know what you guys have...
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
I have an entire engine. Was going to sell it as part of my spare package for rally, but might let it go. Won't part it out though.
-93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq-95 Celica GT Rally Car - 3sge/AWD-10 F150Always buying stock wheels... PM me if interested in selling.
thanks czwalga for the reply. but i won't be needing a complete engine. if your ridding of your coil packs or parting the engine pm my asap!
ya riochet you got lucky is what! i'm contacted several usa stores that buy engine swaps and still no luck. i have another 5 to call to see if they carry coil packs!
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
well i've contacted venus auto, osaka jdm motors, jdm tiger japan, jap perfomance engines, japanese engine zone, japan direct, jdm engine depot and japan motor import. none of them have coil packs for the celica/caldina motor ahh anyone else have a leads??
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
I also bought 4 coil paks off eBay for 130$ around january as spares. Not new, but backups never the less. You can use 1zz coil paks, you just have to repin the plug for the pack.
>
QUOTE (njccmd2002 @ Jul 8, 2013 - 8:33 AM)
>lets see, parts 1000 bucks, seals 400 bucks, labor 70 bucks an hour, machine shop 350.
sorry bro, better off buying a new engine... If it was me, id do that... and sell the bits that are not needed...
btw $305 plus shipping for complete gasket kit hehe
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
you have the head out already? have you tried re-threading it already?
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
bump thread updated read first post. anyone know how to get in contact with mr220v.
This post has been edited by BonzaiCelica: Sep 10, 2013 - 5:55 PM
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
He's on the BEAMS Owners Group frequently. You can PM him there.
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
