looking for some aftermarket cams, pistons, and valves/springs for a 5sfe

I have a set of Webcams 294 Regrind cams in my 5S, just took the motor out last weekend.

I'd be willing to take them out and ship them for the right price!

I also have a few other things you may be interested in if you're looking to get more power from your 5S.

Mine put down 132 WHP and 150 WTQ with all the mods I had done.

Message me if you're interested in anything!

Matt

valves and springs are not going to give you an increase in power. pistons wont either unless you raise the compression. cams will give you some increase.

If you really want power, boost it or add a shot of nitrous.

There's no aftermarket valve springs for the 5S that I'm aware of. There's only 2JZ springs which need the bottom of the spring machined to fit into the stock spring seats. You could use stock or 2JZ retainers.

As for pistons, unless you up the compression like Smaay mentioned, you're not going to get more power out of a forged set. The cams are a good upgrade regardless of N/A or F/I.

i want the internals to survive the cam upgrade. i was looking for about 200 NA whp, but after research, that's not possible. i'm not juicing or boosting my daily. so i'd just like to have a budget build with a little pep in its step to tool around town in.

What do you mean by "internals"? It's not like you need pistons or rods for better cams. You'd only need rods for a higher rev limit.

I have a set of JE Pistons. Stock bore and compression. needs new rings.