I was wandering. Will these fit my celica? I never really understand how the measurement of the centerbore affects the choice of spacers for my celica. What I have is a 97 GT and I also have the rpf1. Another question is H&R seems to be a good brand according to the online reviews. The thread type is also different but I don't think that'll matter? Oh yea one more question. If I was to add these 20mm spacers would I need to get extended lug studs also?

Quick specs:
Bolt Pattern 5x100
Bolt Pattern 5x112
Bolt/Stud Bolt
Center Bore 57.1
Thread Type 14x1.5
Width 20mm


http://www.ebay.com/itm/Audi-VW-H-R-Alumin...5d4&vxp=mtr

This post has been edited by ILoveMySilly97: Feb 6, 2013 - 9:28 PM

>
The center bore is the diameter of the little lip on your hub and on the spacers. Its so the wheel is resting with that of the hub nut the lugs. which is a very controversial subject of safety amongst those who use em..

i'm sure these ones will fit onto your celica but not sure if it'd be work without extended studs.
imho anything more than 10-15mm and you're going to need extended studs.

your best bet would be to buy spacers that are 5x100 with a 54.1 centerbore

hope that helps

Yea that helps. Now I know what specs to look for.

Also if you buy "spacer adapters" which have another set of lugs built in or go with extended lugs the pitch/thread
is 12mm x 1.5

This post has been edited by smkr3w: Feb 6, 2013 - 11:31 PM

>

Yea. I think it'll be easier to just go with the adapters.