does anyone know which is the Fidanza Flywheel that will fit the ST 1.8L 7AFE Celica maybe a part number perhaps I found one not a 100% sure if it will fit however I've seen someone say that i believe the 1zz or the 2zz are the same fit can someone confirm?

http://www.ebay.com/itm/120310423057?ssPag...984.m1438.l2649

will this fit?

the 1ZZ and 2ZZ clutch is the same. I can NOT confirm that the flywheel is the same because the 1ZZ and 2ZZ do NOT share the same flywheel. now it is possible that the 1ZZ flywheel is the same as the 7A-FE

7AFE Flywheel (Toyota) Part #: 13405‑15090

1ZZFE Flywheel (Toyota) Part #: 13451‑22020

So to answer your question, no they don't fit. But if you would have searched and maybe tried a little bit you would have known that...took me all of 1 minute on toyodiy.com

Also theirs no need to post a million threads, you can always edit your thread or just post another question in it...

This post has been edited by travisxcore: Oct 16, 2012 - 1:50 PM

you know what you are right I should have not posted so many threads I just need answers as soon as possible and you are right about the part numbers the only problem is thats oem not aftermarket that I knew no where shows the lightened flywheel for my car but I have heard it has been done with a flywheel from another celica which fits like a direct replacement therefore I am asking to see if anyone can help me out

I'll help you out a little bit more then

Okay so 7AFE & 4AFE share same parts # for flywheel, so their the same. Pretty sure I seen the 4AFE is 200mm and since they share the same flywheel itd be the same.

So you need a 200mm 6 bolt pattern flywheel.

Call the number on the listing and see if they can tell you I guess would be the next step.

This post has been edited by travisxcore: Oct 16, 2012 - 2:14 PM

great thanks I going to look into that right now

Sorry to be the bearer of bad news after getting your hopes up but it won't work. I forgot newer Toyotas have 21 splines, compared to older Toyotas 20 splines. Also the 1ZZ has a 210mm diameter.

This post has been edited by travisxcore: Oct 16, 2012 - 2:23 PM

damn ok thanks for your help