looking to buy another 6th gen celica. It's an st, and I was wondering if I can perform the beams swap into it? I was wondering if the beams would bolt up to the s53 transmission? I know it bolts up directly to the S54 since the 5sfe and 3sge are identical. If it does, will the S53 be able to hold the power output of the beams? Need someones help please?[/size][/size]
BEAMS Swap into 94 st? Someone help please? - 6G Celicas Forums
The BEAMS will work just fine in a '94 ST. You'll have to drill holes for the passenger side motor mount, as with any other A-series to S-series engine swap. I'm sure the BEAMS will bolt up to an S53, although I'm unfamiliar with it. It might not. I can't say for sure about holding the power either, but I can't see the BEAMS chewing the S53 up. Why not pick up a BEAMS with the factory LSD S54 and not worry about the S53?
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
>
I've been looking for one with the 5spd on ebay. found one for $1399. which isn't bad i guess. What about axles? Should I use mr2 cv shafts/axle to withstand the power?
QUOTE (richee3 @ Sep 4, 2012 - 8:36 PM) 
>The BEAMS will work just fine in a '94 ST. You'll have to drill holes for the passenger side motor mount, as with any other A-series to S-series engine swap. I'm sure the BEAMS will bolt up to an S53, although I'm unfamiliar with it. It might not. I can't say for sure about holding the power either, but I can't see the BEAMS chewing the S53 up. Why not pick up a BEAMS with the factory LSD S54 and not worry about the S53?
I've been looking for one with the 5spd on ebay. found one for $1399. which isn't bad i guess. What about axles? Should I use mr2 cv shafts/axle to withstand the power?
Stock transmission should be fine, people have used the stock transmission when they turbo their 7A-FE. The BEAMS only puts out 37 ft. lb. of torque more than the 7A-FE. Provided it'll bolt up you will be good to go, though the transmission for the ST is geared more towards economy than performance.
2001 Miata LS 5-speed
^ It wouldn't match up to the C52, since the 3S-GE uses an S-series transmission. Hence why he's trying for an S53.
'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE
Stock GT axles work perfectly.
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
>
The BEAMs does not produce near enough power to hurt that transmission. Your only increasing the power by about 80hp. That's nothing, considering you can run an S5x trans on an ST215 GTE at almost 300whp. Your clutch will go before the transmission does.
QUOTE (chivo28 @ Sep 4, 2012 - 7:25 PM)
>looking to buy another 6th gen celica. It's an st, and I was wondering if I can perform the beams swap into it? I was wondering if the beams would bolt up to the s53 transmission? I know it bolts up directly to the S54 since the 5sfe and 3sge are identical. If it does, will the S53 be able to hold the power output of the beams? Need someones help please?[/size][/size]
The BEAMs does not produce near enough power to hurt that transmission. Your only increasing the power by about 80hp. That's nothing, considering you can run an S5x trans on an ST215 GTE at almost 300whp. Your clutch will go before the transmission does.
www.tweakdperformance.comsales@tweakdperformance.com
>
Ahh ok, I just saw ST and BEAMS and went from there. Being it's the S53 should be fine, considering then the torque difference between the original intended engine and the BEAMS is almost negligible.
QUOTE (SwissFerdi @ Sep 5, 2012 - 7:21 AM)
>^ It wouldn't match up to the C52, since the 3S-GE uses an S-series transmission. Hence why he's trying for an S53.
Ahh ok, I just saw ST and BEAMS and went from there. Being it's the S53 should be fine, considering then the torque difference between the original intended engine and the BEAMS is almost negligible.
2001 Miata LS 5-speed
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
why a BEAMS? a V6 swap will be about 500 bucks cheaper.
2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac
Maybe he's not familiar with the possibility of the 1MZ-FE swap. 
2001 Miata LS 5-speed
well if he doesnt have strict rules i would suggest a 3MZ
2001 Celica GT-S Turbo1997 Supra TT 6speed1997 Celica 3MZ/1MZ swap1990 Celica All-Trac