thats actually a sloppy conversion, but good attempt. The fenders don't even line up and there is too much warping.
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
With all of the custom body work on that red conversion you could have purchased a real Supra...
And yeah, that white one is ROUGH.
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket
I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
If you're going to do a supra front end, do it right the first time and don't use a crappy duraflex kit.
It will look even worse than using a stock front end.
\Facepalm
-Protection mode, For when your amp tries to blow its load.1995 Toyota Celica GTS-Daily Driver1999 Chevy Cavalier-Winter Beater1994 Honda Civic CX Hatchback-DeadMy Celica!
i say do the curren conversion so much easier and looks so much sweeter
I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
Like the progress on the car. Dont listen to everyone else bashing you. Its your taste and its a fun hobby of your to do work. I dont see everyone else doing so much custom work, it's not easy and takes time. Keep us posted and when are you heading out again?
Power in Balance90 ST coupe- Sold95 ST hatch- Dead :(02 Impreza RS- DD
Im gonna take a silent peep and wait till this is done before I give an opinion... everything looks like **** until its finished...except a turd probably...that would defy that saying
What I think when you think I care
looks like you're making really good progress on your conversion! Its a much different way to go about it then I did when I attempted mine.
IMO yours is WAAAAAY better than I ever did
thanks everyone. I got a little bit done today, but not much.
I know it looks like **** lol cause its not done, but anyone who has done something like this knows its not pretty till the end.
I dont have anything to do tomorrow so i should get alot done, and post up new pics. I think ill have the basic shaping all done tomorrow, just alot of sanding and tedious details after that
and im going to New River, NC
I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
Nice work
[b]My Build Thread|Flickr|My Blog
It's not my cup of tea, but good on you for having a crack at it. I hope it turns out well once it's finished.
3SGE Beams VVT-i powered Celica
I was wondering how the gap was gonna fill out but looks great wish I had the skills or patience for such detail
Always fast and going for the look......
coming along nicely man keep it up
st205 powered ss3 coupe
i just want to see the finished product
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
never seen so much bondo, how many cans there? keep up the work
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
LoL u made robot face in the back
What I think when you think I care
Arent you worry about the bondo and paint cracking. You can get away with a lot on hard surfaces (rear fenders etc). But i know how flimsy those fiberglass or polyfiber bumpers are. They flex a little at highway speeds, not to mention if it happens to be bumped.
-93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq-95 Celica GT Rally Car - 3sge/AWD-10 F150Always buying stock wheels... PM me if interested in selling.
lmao i never saw the robot face, thats kinda funny.
And theres 2 cans on it now, just bought a third. Should only need three. But ive been using it all over the car, not just the front. And used some to finish the speaker box.
As far as cracking, i just have to deal with it if it does. Im going to be painting the car myself again anyhow so if i have to spray something after, its not a big deal. But none of the other parts have cracked, and i did something similar on my friends car and its still fine. the only thing that cracks is the bondo glazing putty stuff, even in like tiny cracks ive never had luck with it. Thats why i take forever just sanding it all, rather than fill the tiny cracks with it.
Got the left side pretty much done, but I dont know if I will get back to the car today for better pics.
I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
Might want to try bondo glass or bondo hair
It's a lot strong than regular bondo
95 gt coupe, v6 swap weekend toy99 gt hatch beams swapped wife's94 st hatch my daily driverhttp://www.6gc.net/forums/index.php?showtopic=82235n
I tried bondo hair like the first time i did anything and it just made a mess. probably because i had no idea what i was doing but regular bondo is super easy for my to work with. I will try it with my next project though... got some ideas on a sub box for 2 18"
I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
That's all I use lol then I use bondo time you use glaze
If you fine bondo hair to be too messy try bondo glsss. It's shorter hairs an a little easyer to use
95 gt coupe, v6 swap weekend toy99 gt hatch beams swapped wife's94 st hatch my daily driverhttp://www.6gc.net/forums/index.php?showtopic=82235n
I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
Looks like a lot of work done there!........ but would it not have been easier just modding a Supra front end to fix on?, will it be ok jarring in a pothole without falling off/cracking.
Well done though!
I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
Can I jump ahead & ask--
What wheels are you planning on?
bondo needs alot of work on the edges and making it look flat...intercooler area seems a bit crooked...but I guess its not all finished either though...I hate bondo because I've never seen anyone do anything that doesnt look perfect to me
What I think when you think I care
