ILoveMySilly97

#1

I've been wandering why is the 5sfe engine tilted? Does it have to do with the transmission position or what? I'm clueless to why it's tilted. Lol.

---

Silly97 ProgressDirtBag87 ProgressCalifornia Members Check In

Box

#2

Just a matter of making things fit. I know the 5S-FE in the Camry/Solara is titled too.

---

2001 Miata LS 5-speed

SupraKid

#3

Because you touch yourself at night.

enderswift

#4

I read somewhere that it was an effort to bring the weight over the front axles, instead of in front of them

Special_Edy

#5

>

QUOTE (enderswift @ May 6, 2012 - 9:31 PM)

>I read somewhere that it was an effort to bring the weight over the front axles, instead of in front of them

I would assume with the larger cylinder head( I imagine its taller than the 3sgte head because its narrow angle) and the taller deck height of the block(because it has a longer stroke). It would hit the USDM hood if it were upright. Also, the manifold mounted catalytic converter would hit the radiator

trdproven

#6

^ thats what i thought.

---

94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)

azian_advanced

#7

i thought had something to do with oil drainage..

---

----------------------------------------------------------------------------------------------------------------------------------------------------------------

Special_Edy

#8

Oh my ideas are just personal observations.

BonzaiCelica

#9

ask toyota?? haha same with 4th gen 3sge...

---

Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514

smkr3w

#10

>

QUOTE (enderswift @ May 6, 2012 - 9:31 PM)

>I read somewhere that it was an effort to bring the weight over the front axles, instead of in front of them

>

QUOTE (azian_advanced @ May 7, 2012 - 12:56 AM)

>i thought had something to do with oil drainage..

I do believe I read somewhere that its shifted for weight and if they tilted anymore it would cause drainage issues.. but I'm not sure.

This post has been edited by smkr3w: May 7, 2012 - 3:39 AM

---

6gcHeroes:808hectortimmybatmandiegotigamak

BonzaiCelica

#11

>

QUOTE (smkr3w @ May 7, 2012 - 4:28 AM)

>>

QUOTE (enderswift @ May 6, 2012 - 9:31 PM)

>I read somewhere that it was an effort to bring the weight over the front axles, instead of in front of them

>

QUOTE (azian_advanced @ May 7, 2012 - 12:56 AM)

>i thought had something to do with oil drainage..

I do believe I read somewhere that its shifted for weight and if they tilted anymore it would cause drainage issues.. but I'm not sure.

going to the toyota museum very soon. The musuem is located here in CA, Torrance also where the TRD Headquarters USA is located.

---

Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514

ILoveMySilly97

#12

So far Special Edy seems to have the most logic answer. Lol. I would like to know what BonzaiCelica can find out for us when he foes to the museum.

---

Silly97 ProgressDirtBag87 ProgressCalifornia Members Check In

azian_advanced

#13

if the 3SFE & 5SFE have the same height, then there's no difference in height between FE (narrow-angle valve) & GE (wide-angle valve) heads according to this pic:



it may also have something to do with keeping the hood line lower, which can also bring down the interior dash without compromising outward visibility, seating position can also be dropped, roof line, etc. etc. like it is for the fr-s/brz

This post has been edited by azian_advanced: May 7, 2012 - 2:59 PM

---

----------------------------------------------------------------------------------------------------------------------------------------------------------------

Bitter

#14

Because they forgot the other 4 cylinders?

No, the correct answer is above, to maintain hood lines and what not, it's a tall engine. The S series do come in cars in a normal 90 deg position, for example in the Altezza where there is ample room.

---

2000 Celica GTS 'slowest gts evar'1998 Mazda 626 FS-DE/CD4-E

njccmd2002

#15

some say its tilted because it was designed in rome.

some say its tilted, because its not straight.

i think its tilted because accidentally

---

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.

zfjohnson07

#16

maybe because it is a tinsy bit bigger look at a 5sfe and the 7afe theres no room infront of the 5sfe if it wasnt titled it would rub into the fans, and the 7afe has alot more room. plus the 5sfe has the bulkier headers . but then again might be for keeping the engine cool.

qatar11

#17

I always assumed it was tilted to make room for the Turbo and WAIC for the 3SGTE

---

-Mikemjcoury@gmail.comTeam Reynolds StyleCelica BlogCelica WikiIt will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work.