Its a 2nd gen right? I think is a 2nd gen because of the bolt pattern im i correct?
This post has been edited by diegohiga: Sep 26, 2011 - 8:29 PM
This post has been edited by diegohiga: Sep 26, 2011 - 8:29 PM
identify this 3s head - 6G Celicas Forums
Definetly not a gen3
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
>
So its a 2nd gen?
QUOTE (presure2 @ Sep 26, 2011 - 4:19 PM) 
>Definetly not a gen3
So its a 2nd gen?
i would guess yes, but im not 100% sure.
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
its not a gen 4 so i would say its a gen 2. it has to be
would help to see the intake and exhaust ports
What I think when you think I care
Looks to be a 2nd gen, but not quite sure.
looks like it was rattle canned
>
That makes it 2nd gen? Lol
QUOTE (bsamps4 @ Sep 26, 2011 - 9:52 PM)
>looks like it was rattle canned
That makes it 2nd gen? Lol
2nd gen has tvis this looks like a 2nd gen head take a look at this 2nd gen exhaust and intake ports
205 head
This post has been edited by Neon90424: Sep 26, 2011 - 9:23 PM
205 head
This post has been edited by Neon90424: Sep 26, 2011 - 9:23 PM
What I think when you think I care
Yeap looks like second gen! Thanks a lot! Now if anyone is selling a valve cover for 2nd gen 3s let me know !
x2 on the 2nd gen. especially because I see the spacers on the buckets. 3rd/4th gen had the spacers under/inside the buckets. and I'm almost positive its not 1st. isn't their a part number stamped on it? there was on mine.
proud =3sgte SWAPPED= '95 Celica ST owner [calling it the GT2 or half-trac]309,000 miles n' ....dead-> ALIVE AGAIN!! ~14,000 miles driven
It's a gen1 3s-ge head.
This post has been edited by Cuts_the_Pilot: Sep 27, 2011 - 7:46 AM
This post has been edited by Cuts_the_Pilot: Sep 27, 2011 - 7:46 AM
ST205 Group A Rallye GT-Four, #61 of 77............600hp GT3582rGRX133 Toyota Mark X 350s
>
Why? If its a first gen it will be the same as first gen 3sgte head. The only thing that changes are the cams and mounting tabs for the intercooler.. correct me if a wrong
This post has been edited by diegohiga: Sep 27, 2011 - 8:17 AM
QUOTE (Cuts_the_Pilot @ Sep 27, 2011 - 8:43 AM)
>It's a gen1 3s-ge head.
Why? If its a first gen it will be the same as first gen 3sgte head. The only thing that changes are the cams and mounting tabs for the intercooler.. correct me if a wrong
This post has been edited by diegohiga: Sep 27, 2011 - 8:17 AM
And so i shall.
The Gen1 3s-ge have individual covers for the cams, where as the gte heads have 1 piece cam cover.
The Gen1 3s-ge have individual covers for the cams, where as the gte heads have 1 piece cam cover.
ST205 Group A Rallye GT-Four, #61 of 77............600hp GT3582rGRX133 Toyota Mark X 350s