So im in need of some help here, and without pictures its probably not going to do me a bit of good but here it goes. the hose that runs from the bottom of the factory catch can on the 3rd gen, i didnt hook it up at first when i put the motor all back together and it sprayed oil all over my engine bay, so i hook it to my catch can yesterday and it made a sort of gurgling sound. fast forward to today, im driving and all of a sudden a ton of white smoke is coming out from under my car..... pop the hood and the catch can is full. i think i may have gotten the routing of the catch can wrong, can anyone help me out with this?

you might be pressurizing the crankcase. oil shouldnt be spewing

somehow you are getting pressure on the crankcase, it has to be a good amount since the PCV valve is suppose to take care of small changes in pressure. if you want to verify the order the hoses go, give me a call after 5 30, I'll be by my car.

I remember there is a hose that goes from the intercooler to the intake, is pretty close to the hoses of the oil catch can, maybe you have the wrong hose ?

read my thread, Blow-by sucks...get ready for new piston rings

This post has been edited by Neon90424: Sep 22, 2011 - 6:09 PM