im working on making a housing that will cover the back of the fog lamps since it is so low to the ground i want the lights to be functional yet durable in the rain and on rocky roads such as construction sights. any ideas will b help im open to all comments. thanks guys
HID fog lamps - 6G Celicas Forums
i have autozone projector fogs w/ an hid kit. works nice && when mounted properly will last a good while.
QUOTE"And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH1994 GT:V6 swap, 5speed E53 W/ LSD, All Power, now RED1995 ST:SOLD @273k miles, Auto, all power, CarPC, White1994 ST:Totaled, 5spd, all power, RedRIP 07/09/09 @ 241,8101994 Lexus LS400:This is my new DD
>
Yeah ive seen that done before (not to b a jerk jus saying) but i want to b different i want the original fog lamps to b hid i havnt seen anyone do it yet
QUOTE (stephen_lee @ Aug 29, 2011 - 8:50 PM) 
>i have autozone projector fogs w/ an hid kit. works nice && when mounted properly will last a good while.
Yeah ive seen that done before (not to b a jerk jus saying) but i want to b different i want the original fog lamps to b hid i havnt seen anyone do it yet
it should be the same as converting your headlights to HID
QUOTE"And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH1994 GT:V6 swap, 5speed E53 W/ LSD, All Power, now RED1995 ST:SOLD @273k miles, Auto, all power, CarPC, White1994 ST:Totaled, 5spd, all power, RedRIP 07/09/09 @ 241,8101994 Lexus LS400:This is my new DD
I thought it would b the same to but the fog lamp bulb is held in by what looks like a battery and a bulb with a white rope looking wire and spring its definetely different, i havnt seen this before haha
>
That's the H3 Halogen Bulb.
QUOTE (199celica @ Aug 30, 2011 - 12:02 AM)
>I thought it would b the same to but the fog lamp bulb is held in by what looks like a battery and a bulb with a white rope looking wire and spring its definetely different, i havnt seen this before haha
That's the H3 Halogen Bulb.
>
Ok kewl ill have to borrow a set of my buddies then haha i kno im a newb bare with me please haha
QUOTE (CrimsonSTX @ Aug 30, 2011 - 12:58 AM)
>>
That's the H3 Halogen Bulb.
QUOTE (199celica @ Aug 30, 2011 - 12:02 AM)
>I thought it would b the same to but the fog lamp bulb is held in by what looks like a battery and a bulb with a white rope looking wire and spring its definetely different, i havnt seen this before haha
That's the H3 Halogen Bulb.
Ok kewl ill have to borrow a set of my buddies then haha i kno im a newb bare with me please haha
its a little different to mount the bulb but with reasoning you can do it 
QUOTE"And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH1994 GT:V6 swap, 5speed E53 W/ LSD, All Power, now RED1995 ST:SOLD @273k miles, Auto, all power, CarPC, White1994 ST:Totaled, 5spd, all power, RedRIP 07/09/09 @ 241,8101994 Lexus LS400:This is my new DD
I was just looking at a set of HID fogs on a Celica this weekend. It looks like what you have to do is cut a hole in the back of the housing for the wires then seal it up with some silicone.
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
Ok ill look into that
I have them, its just a replacement bulb wired through the HID ballast. You have to run wires and seal with silicone or rtv. Pretty easy and it matches the low-beams.
no way i have never seen it done on our 6gc's man is there any way u can send a link where you got them or direct me where i can get them?
>
^Was that my car?
I've done it. The only downside to this is that if the bulbs go out, I'll need to pull off all the sealant and lay down a fresh patch.
Basically, I drilled a hole in the housing where the OEM cable came through. The hole was just barely big enough to get the HID connectors through, then I plugged it all back up with some RTV. I've had them on since December and haven't had a problem with them.
QUOTE (richee3 @ Aug 30, 2011 - 10:57 AM)
>I was just looking at a set of HID fogs on a Celica this weekend. It looks like what you have to do is cut a hole in the back of the housing for the wires then seal it up with some silicone.
^Was that my car?
I've done it. The only downside to this is that if the bulbs go out, I'll need to pull off all the sealant and lay down a fresh patch.
Basically, I drilled a hole in the housing where the OEM cable came through. The hole was just barely big enough to get the HID connectors through, then I plugged it all back up with some RTV. I've had them on since December and haven't had a problem with them.
~bloodMoney
I have full HIDs installed into my fogs and low beams, everything else on my car is LED converted. Heres a crappy pic below.
This post has been edited by trdproven: Aug 30, 2011 - 7:32 PM
This post has been edited by trdproven: Aug 30, 2011 - 7:32 PM
94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)
Dam that looks sick see thats what i want man what did u do?