I went to toyota today and while I was there I priced out the exhaust gasket set for the turbo. $132 here..and think that I can use the Gen II gasket set on the Gen III but I'm not sure. I also didn't see it in gen 3 parts reference. The part number for the whole kit is 04175-74030. does the gasket set fit everything? Oil, water, turbo inlet and DP?
-Jay95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve
nope.
the oil pipe gaskets are diffrent, the dp gasket is diffrent, the exhaust manifold gasket is diffrent, i think the only one that would be the same is the water inlet...lol
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
awe..I was expecting someone to say it works. Where do i get one then?
-Jay95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve
I believe this is what you are looking for sir!
http://www.ebay.co.uk/itm/TOYOTA-CELICA-ST...=item4834703001I had my 3rd gen head gasket set come from Great britain took its time but it was all spot on!
What I think when you think I care
>
QUOTE (Neon90424 @ Aug 21, 2011 - 5:15 PM)
>I believe this is what you are looking for sir!
http://www.ebay.co.uk/itm/TOYOTA-CELICA-ST...=item4834703001I had my 3rd gen head gasket set come from Great britain took its time but it was all spot on!
kindof, but not quite. The turbo gasket set is sold as a separate kit too. That's the full engine gasket kit with the turbo gaskets. I got a full engine rebuild kit but it never came with the turbo gaskets like that one does, which is weird. I do know toyota sells it separately for the gen II in the MR2.
-Jay95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve
I found it on ebay.co.uk searching for Ct20 turbo gasket and found oil water and manifold but no DP gasket...
What I think when you think I care
