I bought this car in October and have been fiddling with it and now i want to get it running. I can push the clutch pedal to the floor so i assume that the hydraulic line is not connected, or i assume thats what its called. I think this is the hole in the firewall where the line is suppose to be

i think i also need the master cylinder and the slave cylinder. heres a video of behind the engine where i think thats at, i dont know if it will help but here it goes

http://www.youtube.com/watch?v=xp1wcctxnbI

please any help would be appreciated

thats for the master cylinder

well do me a favor, if you have a manuel take a picture of what im looking at on your car. i need that and then where it leads to please and thank you

to the left is brake booster to the right is diagnostic plug center is a gaping hole because its missing the master cylinder assembly, slave cylinder is attatched to transmission near the shift fork (7afe c52 trans its located front left of trans) dunno where it is on the 5sfe/s54, ill go take some pics and post them on here in a few for you (i have a ST) and put this link in your book marks http://bgbonline.celicatech.com/6g/ will answer alot of questions of how you reinstall your master cyl and lines,


EDIT: pics as promised again this is from a ST:
Master cylinder

Slave cylinder

Inside car Clutch pedal


This post has been edited by opie_7afe: Jun 24, 2011 - 8:36 PM

sorry dude but the master cyl is GONE

wonder if op got it fixed or what aint responded

has anyone ever replaced this or taken the master cylinder and slave cylinder off.

easy. 2 bolts inside on the clutch pedal and of course the lines