yungazzdriver

#1

I have basically the whole front suspension off a celica gtfour, so I decided to sell off some stuff to get a mini cooper i just bought for my wife on the road. You are getting a heck of a deal because I am selling the calipers discs and pads for 300 shipped. This caliper looks so much better/bigger in person. I cleaned the calipers up and painted them with ceramic paint for calipers. Let me know if you need anything of a gtfour suspension. It has been confirmes you can use the cadillac deville 2001 rotors and just redrill the5x100 pattern.


This post has been edited by yungazzdriver: Jul 20, 2011 - 4:13 PM

sauronlord

#2

>

QUOTE (yungazzdriver @ Jun 14, 2011 - 1:52 PM)

>I have basically the whole front suspension off a celica gtfour, so I decided to sell off some stuff to get a mini cooper i just bought for my wife on the road. You are getting a heck of a deal because I am selling the calipers discs and pads for 500 plus shipping. This caliper looks so much better/bigger in person. I cleaned the calipers up and painted them with ceramic paint for calipers. Let me know if you need anything of a gtfour suspension.

Hello,

You mentioned you have the superstruts. How much do you want for the front pair?
Would you be willing to ship to Ontario, Canada (N2L-6H8)

Thank you!

yungazzdriver

#3

you want the whole front suspension including arms and what not? or just strut and springs?

gt4st205

#4

What condition are the fig-8's in?

yungazzdriver

#5

>

QUOTE (gt4st205 @ Jun 15, 2011 - 5:14 PM)

>What condition are the fig-8's in?

not sure how to test but they look very clean and i shook them and no knocking

This post has been edited by yungazzdriver: Jun 15, 2011 - 7:58 PM

czwalga

#6

Has anyone determined if you can use rotors/pads from another vehicle in the US. I'd buy them from my car, but ill probably be going through rotors twice a year. Don't want to have to keep getting used rotors from overseas.

---

-93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq-95 Celica GT Rally Car - 3sge/AWD-10 F150Always buying stock wheels... PM me if interested in selling.

gt4st205

#7

>

QUOTE (yungazzdriver @ Jun 15, 2011 - 7:57 PM)

>>

QUOTE (gt4st205 @ Jun 15, 2011 - 5:14 PM)

>What condition are the fig-8's in?

not sure how to test but they look very clean and i shook them and no knocking

Did you ever turn the steering wheel while not moving?

ST205WRC

#8

>

QUOTE (czwalga @ Jun 16, 2011 - 7:44 AM)

>Has anyone determined if you can use rotors/pads from another vehicle in the US. I'd buy them from my car, but ill probably be going through rotors twice a year. Don't want to have to keep getting used rotors from overseas.

i have seen people use subaru rotors i think the WRX. same bolt pattern, the rotor is just a little bigger so they take them and have them shaved down.

yungazzdriver

#9

I just got the whole front suspension rack n pinion and brakes shipped to me I dont need it so thats why I am selling it. and to czwalga, yeah I believe either s60 volvos and wrx's use same bolt pattern just like st205wrc said its in the how to article i believe. O and about the pads, they are the same as supra TT jza80

This post has been edited by yungazzdriver: Jun 16, 2011 - 5:58 PM

yungazzdriver

#10

bump

yungazzdriver

#11

I can do 500 shipped or 450 if you pick it up local.

yungazzdriver

#12

Bump for great stopping power

luka

#13

>

QUOTE (ST205WRC @ Jun 16, 2011 - 3:55 PM)

>>

QUOTE (czwalga @ Jun 16, 2011 - 7:44 AM)

>Has anyone determined if you can use rotors/pads from another vehicle in the US. I'd buy them from my car, but ill probably be going through rotors twice a year. Don't want to have to keep getting used rotors from overseas.

i have seen people use subaru rotors i think the WRX. same bolt pattern, the rotor is just a little bigger so they take them and have them shaved down.

also found a specific Cadillac rotor fits in the front, no shaving needed...have to dig back to some pm's seemed like a good choice, think you only have to re-drill the bolt pattern

yungazzdriver

#14

Let me know what cadillac rotor if not i may just keep this brake setup its not that much work and ill lose money if i sell for this price i paid 500 plus shipping for these brakes.

yungazzdriver

#15

Alright so I can sell complete suspension for 125 shipped and the brakes for 400 shipped figure 8's i can do for 75 shipped both. they are in great condition and smooth with no knocking. but im no expert i cant guarantee......

This post has been edited by yungazzdriver: Jul 5, 2011 - 7:37 PM

yungazzdriver

#16

Bump for stopping power

luka

#17

it also appears that the caddilac cts sport wagon front rotors will work too. 315x32(mm) with a 5x120 bolt pattern that will need to be re-drilled.

did you only have the front superstruts?

phantom

#18

what's the distance betwen the mounting holes on the caliper? i want to see if it will fit my car.
thanks.

yungazzdriver

#19

yes fronts only for the super struts AND the distance from center of hole to center of hole is 5 1/4 inches.

yungazzdriver

#20

ALRIGHT i need the money to finish my swap so im letting them go for 350 shipped ASAP and I paid 600 for them........

yungazzdriver

#21

never mind im selling the set for 300 shipped

This post has been edited by yungazzdriver: Jul 20, 2011 - 4:12 PM

DKGT4

#22

Do you by chance have the rear calipers?

yungazzdriver

#23

no rear calipers

yungazzdriver

#24

300 dollars shipped in the USA

bloodMoney

#25

Is this 300 shipped for everything or just the brake components?

---

~bloodMoney

yungazzdriver

#26

for 50 bucks more ill ship everything. but the 300 shipped is just the calipers, rotors, and pads.

ricochet1490

#27

Free Bump!!!!
... If I didn't just basically buy all new front brakes and rotors for my car... 125$ then I'd be on these right now... GLWS

They look hott and would go great with gunmetal wheels!!

Johnnyny

#28

how much picked up

bloodMoney

#29

I should probably inform you that I've already paid for these and half of the order has shipped.

---

~bloodMoney

Johnnyny

#30

nice buy