Over 1M Posts • 84K Topics • 9K Authors

Installing a GT-Four rear strut bar - 6G Celicas Forums

Topic #78914 11 posts Started by HectortheRican
I got my GT-Four rear bar today and, I couldn't get it settled on the strut bolts. I tried jacking up either side to see if that would work, but nothing. The bar would line up with the 4 bolts and sit on them, but I couldn't push it down. Any tips?

taking too long to mod since '09June '12 COTM'95 AT200
you probably have it on backwards. make sure it's facing the right way.

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.
Nope, I had it the right way. There's no it'd fit the other way around, the holes don't line up.

taking too long to mod since '09June '12 COTM'95 AT200
Got it installed, just jacked it up by the cross member to loosen the chassis up.

taking too long to mod since '09June '12 COTM'95 AT200
lol told ya

1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition
Thanks, Kyyyyyllleeeeee <3

Lol

taking too long to mod since '09June '12 COTM'95 AT200
wait what??? you have to jack the car up to fit the rear bar? i was sitting on my sub box with the car on the ground when i installed, everything fit cherry too.

I don't normally drive fast, but when I do its on a curvy section of this island
>
QUOTE (808celica @ Apr 14, 2011 - 2:26 AM) *
>wait what??? you have to jack the car up to fit the rear bar? i was sitting on my sub box with the car on the ground when i installed, everything fit cherry too.

I dunno? I was weird. I was trying to fit it and all 4 bolts were lining up with the holes, but the bar still needed to go down about 2/5" to sit on the tower and I couldn't push it down. I didn't jack the whole car up, I just had to lift it maybe 2 or 3 inches.

taking too long to mod since '09June '12 COTM'95 AT200
LOL, well at least you got it to fit.

*1997 Celica ST - 3SGE Greytop BEAMS*1977 Celica RA29 - Classic Cruiser*2005 Matrix AWD - dedded but still hanging around like a ghost2019 Rav4 XLE Premium - Sports mode is fun.
>
QUOTE (HectortheRican @ Apr 14, 2011 - 2:51 AM) *
>>
QUOTE (808celica @ Apr 14, 2011 - 2:26 AM) *
>wait what??? you have to jack the car up to fit the rear bar? i was sitting on my sub box with the car on the ground when i installed, everything fit cherry too.

I dunno? I was weird. I was trying to fit it and all 4 bolts were lining up with the holes, but the bar still needed to go down about 2/5" to sit on the tower and I couldn't push it down. I didn't jack the whole car up, I just had to lift it maybe 2 or 3 inches.

I know your problem laugh.gif

I don't normally drive fast, but when I do its on a curvy section of this island
>
QUOTE (cheela @ Apr 14, 2011 - 9:52 AM) *
>LOL, well at least you got it to fit.


thats what she said. wink.gif

◊◊◊My F/S Thread!◊◊◊QUOTE(14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out.QUOTEFerdi says (11:29)No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings.