so the car turns on and goes into gear smoothly with or without the clutch. but the problem is the car wont move.. any input?
broken axle? need help - 6G Celicas Forums
Car should go into gear only when you depress the clutch while it is on/running. Sounds like your clutch is out. Hopes that helps.
3sgteing...burns twice as bright, lasts half as long."The weight of the world is love. Under the burden of solitude, under the burden of dissatisfaction."-Allen Ginsberg-
>
dont think its the clutch bro. i just changed it out recently but im pretty sure its either has to do with the axle or the cv joint . i can see it underneath the car i just wasnt too sure so i was looking to get some input
QUOTE (malecrod @ Apr 5, 2011 - 2:38 PM) 
>Car should go into gear only when you depress the clutch while it is on/running. Sounds like your clutch is out. Hopes that helps.
dont think its the clutch bro. i just changed it out recently but im pretty sure its either has to do with the axle or the cv joint . i can see it underneath the car i just wasnt too sure so i was looking to get some input
>
how can you get the car in gear without putting the clutch in? maybe you forgot to hook up the shift linkage.
QUOTE (SynysterSt204 @ Apr 5, 2011 - 2:52 PM)
>>
dont think its the clutch bro. i just changed it out recently but im pretty sure its either has to do with the axle or the cv joint . i can see it underneath the car i just wasnt too sure so i was looking to get some input
QUOTE (malecrod @ Apr 5, 2011 - 2:38 PM)
>Car should go into gear only when you depress the clutch while it is on/running. Sounds like your clutch is out. Hopes that helps.
dont think its the clutch bro. i just changed it out recently but im pretty sure its either has to do with the axle or the cv joint . i can see it underneath the car i just wasnt too sure so i was looking to get some input
how can you get the car in gear without putting the clutch in? maybe you forgot to hook up the shift linkage.
not the axle mine was cracked and still moved, drove it 1000 miles like that. so guess again
either you shift cables are not connected or your clutch is permanently engaged...it should not go into gear without the pedal pushed
ST205 Crew representChallenge Accepted
Yea it's your clutch. Happened to my buddies Cobalt. His was burnt up
>
hmm idk how it could be the clutch i JUST replaced it not too long ago. well it was raining and i didnt get to really get underneath and look im gonna take a look tomorrow and find out whats what
QUOTE (greenhornet94 @ Apr 5, 2011 - 9:15 PM)
>Yea it's your clutch. Happened to my buddies Cobalt. His was burnt up
hmm idk how it could be the clutch i JUST replaced it not too long ago. well it was raining and i didnt get to really get underneath and look im gonna take a look tomorrow and find out whats what
Could have been installed wrong, faulty clutch, there could be many reasons.
The pivot point on your clutch fork could have broke, regardless I doubt it's an axle. Could be but I doubt it, the car does have an open diff so if the axles broke you wont move but there would probably be some resistance going into gear without the clutch.
The pivot point on your clutch fork could have broke, regardless I doubt it's an axle. Could be but I doubt it, the car does have an open diff so if the axles broke you wont move but there would probably be some resistance going into gear without the clutch.
-93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq-95 Celica GT Rally Car - 3sge/AWD-10 F150Always buying stock wheels... PM me if interested in selling.
>
well i got underneath today and from what i saw the front driverside axle is broken.gonna get it swapped out and hopefully back on the road soon. i appreciate everyones input and hopefully it really isnt the clutch
QUOTE (czwalga @ Apr 6, 2011 - 7:32 AM)
>Could have been installed wrong, faulty clutch, there could be many reasons.
The pivot point on your clutch fork could have broke, regardless I doubt it's an axle. Could be but I doubt it, the car does have an open diff so if the axles broke you wont move but there would probably be some resistance going into gear without the clutch.
The pivot point on your clutch fork could have broke, regardless I doubt it's an axle. Could be but I doubt it, the car does have an open diff so if the axles broke you wont move but there would probably be some resistance going into gear without the clutch.
well i got underneath today and from what i saw the front driverside axle is broken.gonna get it swapped out and hopefully back on the road soon. i appreciate everyones input and hopefully it really isnt the clutch
>
You can check, jack the car up. Have someone put it in first gear, if the broke axles is spinning right by the transmission its just the axles and not the clutch.
QUOTE (SynysterSt204 @ Apr 6, 2011 - 10:21 AM)
>>
well i got underneath today and from what i saw the front driverside axle is broken.gonna get it swapped out and hopefully back on the road soon. i appreciate everyones input and hopefully it really isnt the clutch
QUOTE (czwalga @ Apr 6, 2011 - 7:32 AM)
>Could have been installed wrong, faulty clutch, there could be many reasons.
The pivot point on your clutch fork could have broke, regardless I doubt it's an axle. Could be but I doubt it, the car does have an open diff so if the axles broke you wont move but there would probably be some resistance going into gear without the clutch.
The pivot point on your clutch fork could have broke, regardless I doubt it's an axle. Could be but I doubt it, the car does have an open diff so if the axles broke you wont move but there would probably be some resistance going into gear without the clutch.
well i got underneath today and from what i saw the front driverside axle is broken.gonna get it swapped out and hopefully back on the road soon. i appreciate everyones input and hopefully it really isnt the clutch
You can check, jack the car up. Have someone put it in first gear, if the broke axles is spinning right by the transmission its just the axles and not the clutch.
-93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq-95 Celica GT Rally Car - 3sge/AWD-10 F150Always buying stock wheels... PM me if interested in selling.
>
yea thats exactly what it was
QUOTE (czwalga @ Apr 6, 2011 - 11:34 AM)
>>
You can check, jack the car up. Have someone put it in first gear, if the broke axles is spinning right by the transmission its just the axles and not the clutch.
QUOTE (SynysterSt204 @ Apr 6, 2011 - 10:21 AM)
>>
well i got underneath today and from what i saw the front driverside axle is broken.gonna get it swapped out and hopefully back on the road soon. i appreciate everyones input and hopefully it really isnt the clutch
QUOTE (czwalga @ Apr 6, 2011 - 7:32 AM)
>Could have been installed wrong, faulty clutch, there could be many reasons.
The pivot point on your clutch fork could have broke, regardless I doubt it's an axle. Could be but I doubt it, the car does have an open diff so if the axles broke you wont move but there would probably be some resistance going into gear without the clutch.
The pivot point on your clutch fork could have broke, regardless I doubt it's an axle. Could be but I doubt it, the car does have an open diff so if the axles broke you wont move but there would probably be some resistance going into gear without the clutch.
well i got underneath today and from what i saw the front driverside axle is broken.gonna get it swapped out and hopefully back on the road soon. i appreciate everyones input and hopefully it really isnt the clutch
You can check, jack the car up. Have someone put it in first gear, if the broke axles is spinning right by the transmission its just the axles and not the clutch.
yea thats exactly what it was