i have been wondering.
Recently searching i came across that the HUB with the celica and the st205 are the same part number.
Most toyotas have very similar part numbers.
The question is, anybody has had the chance to compare the hub of the celica 5x100 vs the Camry 5x114.3.
if they are very similar in dimensions, maybe changing the bearings..
Its been done all the times in the 1gc,
Reasons behind it, are just pure conjectures, ideas, blah, blah blah, anyone has a camry hub?
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
search search!!! i think i read yesterday when i was searching for studs that they are interchangeable
>
QUOTE (zfjohnson07 @ Mar 23, 2011 - 8:03 PM)
>search search!!! i think i read yesterday when i was searching for studs that they are interchangeable
OMG you just made my day....
Search?
I think its never been done before... im not talking about the studs, im talking about swapping an entire hub...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
>
QUOTE (njccmd2002 @ Mar 23, 2011 - 9:47 PM)
>>
QUOTE (zfjohnson07 @ Mar 23, 2011 - 8:03 PM)
>search search!!! i think i read yesterday when i was searching for studs that they are interchangeable
OMG you just made my day....
Search?
I think its never been done before... im not talking about the studs, im talking about swapping an entire hub...
talk to trdgt4 I believe he changed out his hub and now has 5x114.5 bolt battern. I know your asking for these because you just don't find as man nice offset rims in 5x100 that will suite out celica right??
Group buy to replicate Narrow E series transaxle partshttp://www.6gc.net/forums/index.php?showto...p;#entry1107514
It gives other possibilities for rims, disc, and trd brakes....
the offset can be fixed with spacers.. but the rest cant.///
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
it wasn't TRDGT4, but another NZ'er (Anth-205) who's running 5x114.3 (and has been for some time)
hope he doesn't mind me saying some of the work he's done
Rav4 hubs
modified Supra disks (pm him to see if he can talk in detail about what was changed)
the Rotors Celica Supra
Disc face: 62.26mm 61.88mm
Thickness: 30mm 30mm
Flange: 6.44mm 6.4mm
offset: 57.6mm 50.21mm
size: 315mm 323mm
ST202 SS-II CELICA threadNew Zealand members check inSticky thread's: How to contribute and troubleshoot.
>
QUOTE (Rusty @ Mar 24, 2011 - 12:43 AM)
>it wasn't TRDGT4, but another NZ'er (Anth-205) who's running 5x114.3 (and has been for some time)
hope he doesn't mind me saying some of the work he's done
Rav4 hubs
modified Supra disks (pm him to see if he can talk in detail about what was changed)
the Rotors Celica Supra
Disc face: 62.26mm 61.88mm
Thickness: 30mm 30mm
Flange: 6.44mm 6.4mm
offset: 57.6mm 50.21mm
size: 315mm 323mm
cool thanks, is he still active in the site, wonder what year rav 4.
the hub might change, but given the dimensions of the bearing, pretty sure we can find one to adapt....
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
I looked into this before, you will keep your original Celica baaring, and use a Camry / rav4 hub, I'm at work so don'ty have my notes here, but from top of my head the hubs are mostly the same but the bearings are different. I think I was looking at a Camry 1999 when I was looking into this.
I was also looking into 4 x 100 which is just as easy, earlier celicas hubs with 4 x 100 are compatible with our bearings as well.
reason why I didn't go with either ? I found wheels that fit properly, that was my only motive.
well, yeah, i was thinking this would be a great mod, but i have bought some 5x114.3 things...
but ill look into it...
Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
