Over 1M Posts • 84K Topics • 9K Authors

B.E.A.M.S. - 6G Celicas Forums

Topic #77226 68 posts Started by Dangercart1
Any update?

"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
Finally got a chance to start working on the celica again, I did some tests on the MAF sensor the resistance was fine but i fond no voltage when air was passing through it, so I'm thinking a bad sensor. I measured the intake tube it was almost exactly 3 inches, I also removed the drivers side steering knuckle and dropped it off at a shop to finally get the wheel bearing fixed. Another thing I want to check is the spark plug gaps, anybody know what they should be?
Your intake pipe is slightly large. You need a 71 mm pipe and 3 inches is about 76 mm. I've had 2 intake pipes with a difference of .8 mm and I can feel a definite low end power difference between the two. I would think it will still run though. Spark plug gap should be .44". I've never checked voltage on my MAF, so let me do that and find out what kind of reading I get.

"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us touse the search button!2006 Aston Martin V8 Vantage.1998 Celica GT-BEAMSSwapped.2022 4Runner TRD Off Road Prenium.2021 GMC Sierra AT4.
there is no specific level, when you blow into the end of the sensor the voltage should jump from 0 to however hard you blow, mine didn't budge
Been a long time so I figured I would leave an update, the bucking problem was related to the ECU, I managed to find the correct ECU and the engine has been doing great since. Money has been tight with trying to pay for school put I've managed to put some tires and a good portion of the much needed steering/suspension parts on it. Still need the following:

Struts/springs
Throttle thermostat
Lower engine mounts and rear bracket
To locate the power steering leak
and much more.

I'll attempt to get some pictures up tomorrow in the daylight.
good thing...

Learned a lot in 10 years...I hardly log in anymore, last loginToday Sept 6 2019, and I was forced just to clarify a post. LOLIf you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in2grfe Swapped...Why I chose the 2GR, before you ask read here...A great civilization is not conquered from without until it has destroyed itself from within.@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
woohoooooooooo!

The "Fly Low" Project: 3rd Gen 3SGTE
Mine is doing the exact same thing after swap.
What was your conclusion exact, course I'm about to buy a new MAF.??