trdwasiq

#1

WTB: FUEL LINE FROM FUEL FILTER TO FUEL RAIL. I HAD 7AFE ONE BEFORE SINCE I GOT A 3SGE SWAP. THE RAIL ITS ON THE OTHER SIDE. SO ITS NOT LONG ENOUGH.. ANYONE GOT A 3SGE FUEL RAIL LAYIN AROUND?
OR WHERE CAN I GET THAT FROM

---

KEEPIN IT LOW... WAP PRODUCTIONS... www.myspace.com/waprod

presure2

#2

>

QUOTE (trdwasiq @ Dec 17, 2010 - 1:07 PM)

>WTB: FUEL LINE FROM FUEL FILTER TO FUEL RAIL. I HAD 7AFE ONE BEFORE SINCE I GOT A 3SGE SWAP. THE RAIL ITS ON THE OTHER SIDE. SO ITS NOT LONG ENOUGH.. ANYONE GOT A 3SGE FUEL RAIL LAYIN AROUND?
OR WHERE CAN I GET THAT FROM

if you cant find one, you can make one from some 6an line, 2X 6an hose ends, and 2X 12X1.25 metric to 6an fittings.
HTH.

---

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered

trdwasiq

#3

where can i get those hoses from?

---

KEEPIN IT LOW... WAP PRODUCTIONS... www.myspace.com/waprod

Sunny

#4

Hi,

here this is a draw of a ST205 fuel line you can sent to http://www.earls.co.uk/index.php or any other shop



Uploaded with ImageShack.us

i tooked the measurement from a oem fuel line but don't mounted the line yet so i can't give you a feedback about the fittment

greetz

This post has been edited by Sunny: Dec 17, 2010 - 4:17 PM

---

KEEP COOL UNDER PRESSURE

presure2

#5

summitracing.com

sunny, you can eliminate the banjo bolts and just use 12X1.25 to 6an fittings on the fuel rail and the filter. then just use 6an hose ends and make your own lines, its very simple.

---

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered

Sunny

#6

Hi,

yes i know

here are two versions of a gen.4 rail



Uploaded with ImageShack.us



greetz

---

KEEP COOL UNDER PRESSURE

trdwasiq

#7

i hv got a 3rd gen 3sge.. i m gna try to make that .. thx for the help guys

---

KEEPIN IT LOW... WAP PRODUCTIONS... www.myspace.com/waprod