_Jim_

#1

Hey everybody, I have another half cut being dropped off to me within the next week. The clips has 19K miles. The front end has been sold to a board member, and the motor will be going into my blue celica, but everything else is for sale.

Parts remaining are:
CT20B turbo with oil lines and factory down pipe (500 shipped)
AWD drivetrain (Transmission, rear cradle, rear diff, complete driveshaft, rear axles, rear rotors, rear brakes, etc) (1500 shipped)
Front rotors and calipers (450 shipped pending)
factory strut tower bar (100 shipped)
all 4 headlights (200 shipped)
Complete Super Strut Suspension (300 shipped)
3 spoke steering wheel (120 shipped)
and anything else you guys can think of.

All prices are best offer, and let me know what you guys are looking for.

This post has been edited by _Jim_: Oct 2, 2010 - 8:35 AM

---

330whp 309ft/lbs @ 21 PSI

_Jim_

#2

>

QUOTE (Fate @ Sep 30, 2010 - 2:16 PM)

>Jim, PM me your number when you have a chance. I lost all my contacts when i switched phones. I'm looking for a few odds and ends and hopefully you can help. Thanks!

PM on the way

>

QUOTE (UniqueGT4 @ Sep 30, 2010 - 2:17 PM)

>Any pics bro can send to my email Raulito006@aol.com

M container has not landed yet, so no pictures as of yet. I see you are new, so search my name and you will see I am no BS and I do this stuff all the time. If there is anything you need, feel free to ask...as it will be ready to ship within 2 weeks.

>

QUOTE (stephen_lee @ Sep 30, 2010 - 2:20 PM)

>shiit.. i hope something like this comes by again after my swap is running....i want AWD parts.

Maybe man. I am starting to wind myself out of this, as it is very time consuming. I wont be doing this for very much longer, as I want to get back to just working/building/finishing my own projects...as I have a few

---

330whp 309ft/lbs @ 21 PSI

_Jim_

#3

YOUR THE BEST MANNY!!!

Yes, the tread is still alive, and as like Manny said...I have been without a computer for the past few weeks.

My clip was delayed awhile (a little over 2 weeks) due to the NYC longshoreman strike. I finally have the clip and new motors sets in my possession and will be getting out everyone's order. I have spoken with everyone with outstanding orders and have explained to them the situation, and they were all very understanding. If I haven't gotten back to you about an outstanding order, please PM me as I now have my computer back up and running.

As for parts, feel free to ask.

Motor is sold
Front end conversion is sold
brakes are sold
RHD conversion is pending
AWD conversion is pending

---

330whp 309ft/lbs @ 21 PSI

_Jim_

#4

>

QUOTE (lilgreenyoda @ Jan 3, 2011 - 3:50 AM)

>Now I know why your PM box is full. Gimme a yell on PM whenever you can bro.

My inbox is full because my computer crapped out on me. I am on a friends computer and have cleared my inbox. For some reason my iphone will only let me read messages but not reply. So if I take a few days to get back to you guys, it is because I need to use my friends computer.

But as stated, inbox is cleared so feel free to pm me.

---

330whp 309ft/lbs @ 21 PSI

bccentaur3

#5

Glad you got your stuff man. Now I'm just waiting for the RHD conversion from Jim. I understand his situation but can only be patient for so long.

This post has been edited by bccentaur3: Jan 23, 2011 - 1:11 PM

---

98 Celica gt red- totaled deer94 Celica st black DD (bad weather beater)- totaled deer95 Celica gt silver- chassis sold88 Celica All-Trac (Burned to a crisp)94 Celica gt white (sold)In need of a rust free chassis!!!!

_Jim_

#6

NWcelica, I am glad we were able to talk on the phone and that you finally got your parts. Thanks to everybody who went to bat for me and told NWCelica I was a stand up guy and would not run with his money. But he had every right to be annoyed, as it did take some time to send out his stuff. We spoke on the phone and I explained to him the type of weeks I have been having. If there is anything else you need NWCelica...feel free to PM me. Thanks for your time and business. All orders have shipped. The only package left to go out is the RHD conversion, and that will be out by the end of the week. Thank you for time, patience, and business to the many members who have done business with me within the past few weeks.

---

330whp 309ft/lbs @ 21 PSI

Fate

#7

Called ya an left a message. Shipment received. Thanks man.

---

The "Fly Low" Project: 3rd Gen 3SGTE

TRD_Ian

#8

jim i am in need of a coil pack and resistor pack for a 3rd gen do you buy chance have some ur willing to sell? pm me
thanks in advance Ian

---

i hate snow, missing my celica

Island_Racer

#9

hey man, if its a clip i was wondering if you had the radiator bulkhead on it. im not really sure if thats what it's called but what im talking about is the part that the front bumper rests on. the ST202 and other chassis make my bumper sit too low....(as in i can put ma fingers under ma bonnet with it on)....so i need a ST205 one. Do you have what im talking about.

also, can anyone give me the correct name for that part?

presure2

#10

>

QUOTE (Island_Racer @ Jan 30, 2011 - 1:28 AM)

>hey man, if its a clip i was wondering if you had the radiator bulkhead on it. im not really sure if thats what it's called but what im talking about is the part that the front bumper rests on. the ST202 and other chassis make my bumper sit too low....(as in i can put ma fingers under ma bonnet with it on)....so i need a ST205 one. Do you have what im talking about.

also, can anyone give me the correct name for that part?

its called the upper bumper support.
you can get it new from toyota for under 50$.

---

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered

mkernz22

#11

^Manny I think he was talking about the GT4 upper bumper support. or is it really that cheap?

presure2

#12

>

QUOTE (mkernz22 @ Jan 30, 2011 - 11:09 AM)

>^Manny I think he was talking about the GT4 upper bumper support. or is it really that cheap?

umm yes, i know that.
and yes, it is that cheap.

:edit:
thread cleaned!

---

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered

mkernz22

#13

goddamn. then the ones on ebay are a rip off. $300 for that ish.

Island_Racer

#14

thanks man, "upper bumper support"
and ur sure the american toyota distributors can get ST205 parts....thanks again.

projectgt

#15

Do you have the mounts and shifter cables?

injection

#16

>

QUOTE (_Jim_ @ Sep 30, 2010 - 1:43 PM)

>Hey everybody, I have another half cut being dropped off to me within the next week. The clips has 19K miles. The front end has been sold to a board member, and the motor will be going into my blue celica, but everything else is for sale.

Parts remaining are:
CT20B turbo with oil lines and factory down pipe (500 shipped)
AWD drivetrain (Transmission, rear cradle, rear diff, complete driveshaft, rear axles, rear rotors, rear brakes, etc) (1500 shipped)
Front rotors and calipers (450 shipped pending)
factory strut tower bar (100 shipped)
all 4 headlights (200 shipped)
Complete Super Strut Suspension (300 shipped)
3 spoke steering wheel (120 shipped)
and anything else you guys can think of.

All prices are best offer, and let me know what you guys are looking for.

Jim, do you have an st205 map sensor? If so, do you want 2 sell 2 me...

94celicadude

#17

Do you still have the 3 spoke steering wheel? and if so does it come with everything? (Not sure if those had airbags, if so is it included)

Thanks

---

1994 GT Hatchback1994 ST Coupe1988 Corolla Wagon All-Trac1999 Corvette2008 Cobalt SS Turbo

projectgt

#18

Bump for parts

TEAMFaint

#19

So when you say complete super strut suspension what does this all include?
Both fig 8's as well as both lower control arms? struts and springs at all?
Let me know what it all includes as I am highly interested.

Thanks my friend.

-Kellen.

---

current project: looking :(

mcsteamy

#20

I am looking for an st205 hood and front bumper if anyone can help with that. Thanks

I am looking for a hood and front bumper if you can help thanks air2air@myedl.com

DGolden32

#21

Alright, i need:

1. Rear seat outer hinge (LH)
2. Shift boot with collar (if in good cond.)
3. Door panel hardware, specifically the main screw in the hole under the handle (x2)
4. Black driver's floor mat (if in pretty good cond.)
5. Bolt that holds the OBD-II diagnostics plug in under the dash
6. Passenger door panel (if black interior & good cond.)

I know its a lot of random crap, would you happen to have any of that?

PS - I have a oem '96 gt spoiler FS or trade and also all the trunk interior parts

cryptor

#22

hello

tryed to pm you but your inbox is full..

could you send pictures of the st205 brakes.



>

QUOTE (_Jim_ @ Sep 30, 2010 - 1:43 PM)

>Hey everybody, I have another half cut being dropped off to me within the next week. The clips has 19K miles. The front end has been sold to a board member, and the motor will be going into my blue celica, but everything else is for sale.

Parts remaining are:
CT20B turbo with oil lines and factory down pipe (500 shipped)
AWD drivetrain (Transmission, rear cradle, rear diff, complete driveshaft, rear axles, rear rotors, rear brakes, etc) (1500 shipped)
Front rotors and calipers (450 shipped pending)
factory strut tower bar (100 shipped)
all 4 headlights (200 shipped)
Complete Super Strut Suspension (300 shipped)
3 spoke steering wheel (120 shipped)
and anything else you guys can think of.

All prices are best offer, and let me know what you guys are looking for.