Hey, so my window trim is cracked and missing pieces on the rear quarter window. How would i remove the window and install a new one?

no one? =(

You would need to get a steak knife to cut the rubber on the side closest to the pass and driver doors. (Just a little break through slice)
Then get a thin cutting wire from home depot, put it through that hole you made and make your way around the whole window.
It would be easier to explain with pictures, but I hope that helps and you get the concept of what I'm talking about.

this is probably something best left to a window professional

that is what you need + a long knife. Cut from the interior

from what i've read the rear windows are bonded to the car w/ a sort of glue. once your remove the plastic body trim from the inside you can see it. you'll have to cut it out either with a tool like posted above or you might just try asking an autoglass place, one by me said thy would do it for 25 bucks if i take out the interior plastic, you can prolly find some shop close to give a simlar or better deal.

hope that helps i'm looking to do this soon too

jec

thanks guys, i'll find a shop that'll do it for me. Didn't realise it was that much work

>


All automotive FIXED windows (front, rear, quarter) are adhered with "glue"

you'll have to get window sealant adhesive to re-adhere the replacement back to the car + the required trim pieces

Hi guys...jusy to say I will put together a DIY on how to do this asap.

I am in the middle of customising/restoring my celica and giving it a fresh paint job so have removed the quarter windows, drip rail and window trims.

I shall get my pics up on a new thread asap.

Cheers.