Over 1M Posts • 84K Topics • 9K Authors

How can I get this off? - 6G Celicas Forums

Topic #75369 7 posts Started by HectortheRican


When I first got her, it was just a black strip across the rear window. But that was in the fall/winter. Now it's summer and the blazing Texas sun cracked it all up and I want it gone. I was thinking a razor blade, goo-gone, and LOTS of wax on/wax off but I wanna see if you guys have an easier way.

taking too long to mod since '09June '12 COTM'95 AT200
Razor blade + heat gun (don't get too hot or you bust your window). After the worst is removed, just clean the residue with thinner or alcohol.

'94 ST
>
QUOTE (conus00 @ Aug 8, 2010 - 2:23 PM) *
>Razor blade + heat gun (don't get too hot or you bust your window). After the worst is removed, just clean the residue with thinner or alcohol.

I don't the slightest clue how to use a heat gun, dude. I don't even know where to get one lol

taking too long to mod since '09June '12 COTM'95 AT200
walmart. or else use a hair dryer lol.
straight razor after spraying it with some water. it will take a little time. but it will come off clean
ummm
use a hair dryer to heat it up
then pour some goo gone
then use some floss or fishing line
i wouldnt use a razor blade but u can if you are careful with it
its gonna take a bit of time and some elbow grease either way
oh and heat it up every so often but make sure any adhesive remover is dry cause it could catch fire

This post has been edited by thisguy18: Aug 8, 2010 - 10:21 PM
>
QUOTE (thisguy18 @ Aug 8, 2010 - 10:20 PM) *
>ummm
use a hair dryer to heat it up
then pour some goo gone
then use some floss or fishing line
i wouldnt use a razor blade but u can if you are careful with it
its gonna take a bit of time and some elbow grease either way
oh and heat it up every so often but make sure any adhesive remover is dry cause it could catch fire

Pour it how? just, over it?

>
QUOTE (NewOrleans @ Aug 8, 2010 - 9:00 PM) *
>straight razor after spraying it with some water. it will take a little time. but it will come off clean


I'm going to try this first since it's just water

taking too long to mod since '09June '12 COTM'95 AT200