SwissFerdi

#31

>

QUOTE (808celica @ Apr 4, 2010 - 4:11 AM)

>Most of you are too pussy to slamm your car and flush your wheels

BS, I'd much rather have a setup like yours. Flush with the fender, no camber.

---

'97 ST\ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+[sold 10/18]'93 MX-5LE

manphibian

#32

I'm not a fan.

But then, if i had a car that i could just trailer to shows, then trailer it home again, then why not.

Plus to refer to this, or any other modified look as JDM is dumb. I don't remember any car being made with -20 degree camber and 1mm of suspension travel being made for the japanese domestic market

---

-LukeMy Flickr

EKAn

#33

This post has been edited by EKAn: Oct 1, 2012 - 12:02 AM

---

QUOTEwhat hes saying is if you put blue lights in you car youll lose hp.

stl95celica

#34

love it. thats what im going for but not as insane

---

-frank

808celica

#35

>

QUOTE (SwissFerdi @ Apr 4, 2010 - 5:28 AM)

>>

QUOTE (808celica @ Apr 4, 2010 - 4:11 AM)

>Most of you are too pussy to slamm your car and flush your wheels

BS, I'd much rather have a setup like yours. Flush with the fender, no camber.

I have camber

---

I don't normally drive fast, but when I do its on a curvy section of this island

Harold_Fastwaker

#36

Leave it to the celica community to tell how to properly set up suspension, body roll, spring rates, rebound, dampers, etc. LOf'nL.


Preferably on airbags is bull. You do it static with coilovers.


Different strokes for different folks. I like my -camber front and rear and taking speed bumps at angles, yes I daily it and yes it is my celica. The sad part is the damn Megans, even with their huge amounts of dropability do not go low enough. They are dropped to the max and still don't cut it.

---

:.....Flush Wheel Fitment Guide.....:

808celica

#37

>

QUOTE (Harold_Fastwaker @ Apr 4, 2010 - 6:06 PM)

>Leave it to the celica community to tell how to properly set up suspension, body roll, spring rates, rebound, dampers, etc. LOf'nL.


Preferably on airbags is bull. You do it static with coilovers.


Different strokes for different folks. I like my -camber front and rear and taking speed bumps at angles, yes I daily it and yes it is my celica. The sad part is the damn Megans, even with their huge amounts of dropability do not go low enough. They are dropped to the max and still don't cut it.

DD our cars is the best part

Too bad AirRunner dont make kits for our cars T__T guess i gotta do UAS or D2 Air suspensions

---

I don't normally drive fast, but when I do its on a curvy section of this island

Harold_Fastwaker

#38

>

QUOTE (808celica @ Apr 5, 2010 - 12:10 AM)

>>

QUOTE (Harold_Fastwaker @ Apr 4, 2010 - 6:06 PM)

>Leave it to the celica community to tell how to properly set up suspension, body roll, spring rates, rebound, dampers, etc. LOf'nL.


Preferably on airbags is bull. You do it static with coilovers.


Different strokes for different folks. I like my -camber front and rear and taking speed bumps at angles, yes I daily it and yes it is my celica. The sad part is the damn Megans, even with their huge amounts of dropability do not go low enough. They are dropped to the max and still don't cut it.

DD our cars is the best part

Too bad AirRunner dont make kits for our cars T__T guess i gotta do UAS or D2 Air suspensions

Yeah, I am not sure what I am going to do about my car. I may just be smart about it and say screw it and buy something new to toy with. I dunno, I need to buy new wheels, really want some 19s. That can probably make me happy about the car not going low enough.

However, with megans you can cheat and put an ugly body kit on and make it appear much lower than it is. IE: 404, veilside crap, etc.

---

:.....Flush Wheel Fitment Guide.....:

808celica

#39

>

QUOTE (Harold_Fastwaker @ Apr 4, 2010 - 6:15 PM)

>>

QUOTE (808celica @ Apr 5, 2010 - 12:10 AM)

>>

QUOTE (Harold_Fastwaker @ Apr 4, 2010 - 6:06 PM)

>Leave it to the celica community to tell how to properly set up suspension, body roll, spring rates, rebound, dampers, etc. LOf'nL.


Preferably on airbags is bull. You do it static with coilovers.


Different strokes for different folks. I like my -camber front and rear and taking speed bumps at angles, yes I daily it and yes it is my celica. The sad part is the damn Megans, even with their huge amounts of dropability do not go low enough. They are dropped to the max and still don't cut it.

DD our cars is the best part

Too bad AirRunner dont make kits for our cars T__T guess i gotta do UAS or D2 Air suspensions

Yeah, I am not sure what I am going to do about my car. I may just be smart about it and say screw it and buy something new to toy with. I dunno, I need to buy new wheels, really want some 19s. That can probably make me happy about the car not going low enough.

However, with megans you can cheat and put an ugly body kit on and make it appear much lower than it is. IE: 404, veilside crap, etc.

I know of 2 people cheating little kid andrew knows who
I'm ordering a cute set of 16x8 +5 IF you say Megans dont cut it WTF am I supposed to get now
I <3 hitting frame

---

I don't normally drive fast, but when I do its on a curvy section of this island

Harold_Fastwaker

#40

>

QUOTE (808celica @ Apr 5, 2010 - 12:24 AM)

>>

QUOTE (Harold_Fastwaker @ Apr 4, 2010 - 6:15 PM)

>>

QUOTE (808celica @ Apr 5, 2010 - 12:10 AM)

>>

QUOTE (Harold_Fastwaker @ Apr 4, 2010 - 6:06 PM)

>Leave it to the celica community to tell how to properly set up suspension, body roll, spring rates, rebound, dampers, etc. LOf'nL.


Preferably on airbags is bull. You do it static with coilovers.


Different strokes for different folks. I like my -camber front and rear and taking speed bumps at angles, yes I daily it and yes it is my celica. The sad part is the damn Megans, even with their huge amounts of dropability do not go low enough. They are dropped to the max and still don't cut it.

DD our cars is the best part

Too bad AirRunner dont make kits for our cars T__T guess i gotta do UAS or D2 Air suspensions

Yeah, I am not sure what I am going to do about my car. I may just be smart about it and say screw it and buy something new to toy with. I dunno, I need to buy new wheels, really want some 19s. That can probably make me happy about the car not going low enough.

However, with megans you can cheat and put an ugly body kit on and make it appear much lower than it is. IE: 404, veilside crap, etc.

I know of 2 people cheating little kid andrew knows who
I'm ordering a cute set of 16x8 +5 IF you say Megans dont cut it WTF am I supposed to get now
I <3 hitting frame

Run a 40 series tire on a big stretch to make up for it. I stretched 45 series but a 40 won't make a huge difference, I would need to bump from 205 to a 195 or something on my 8.5J. The biggest problem I am seeing is that sure you can add more negative camber to drop the car but you wont be able to fill the wheel gap. My megans' tube is seriously sitting a few MM's from the knuckle. I could lower the spring perch so the preload is far less, but at the same rate the car would allow to much travel and my sidewalls would just shred completely through. Right now I hit the fender edge with my sidewall, inside the wheel well I have plenty of space, but again I have 9.5J in the rear. 8J will probably give you a bit more space to work with this and less -camber.

---

:.....Flush Wheel Fitment Guide.....:

GriffGirl

#41

hellaflush is what happens after the injestion of bad mexican food.

samir0189

#42

>

QUOTE (GriffGirl @ Apr 4, 2010 - 11:40 PM)

>hellaflush is what happens after the injestion of bad mexican food.

LMAO. i was about to post something similar a few mins ago, but i thought it wouldnt go over well.

TY.

---

◊◊◊My F/S Thread!◊◊◊QUOTE(14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out.QUOTEFerdi says (11:29)No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings.

808celica

#43

i got a meeeeeean toilet that can hellaflush just for that occasion

---

I don't normally drive fast, but when I do its on a curvy section of this island

96stgreendemon

#44

when hella flush goes wrong

---

1996 Toyota Celica Project Mean Green3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <32001 Solar yellow Lexus IS3002001 Dodge ram 1500 Off-road edition

Harold_Fastwaker

#45

>

QUOTE (96stgreendemon @ Apr 5, 2010 - 12:54 AM)

>when hella flush goes wrong

I guess.

Just like how people seem to believe that wheel rims only bend when people run stretched tires. Yeah, because a stretched tire and +20 offset will shear lugs right off the car. Makes complete sense.

---

:.....Flush Wheel Fitment Guide.....:

Harold_Fastwaker

#46

Yes it is dirty, yes my garage is messy and no I do not care. Lastly, yes I just took this picture at 1AM.

This post has been edited by Harold_Fastwaker: Apr 5, 2010 - 12:39 AM

---

:.....Flush Wheel Fitment Guide.....:

808celica

#47

MMMMMMmmmm

That's right beeeeeeches take that in and LOVE IT

---

I don't normally drive fast, but when I do its on a curvy section of this island

Espo

#48

>

QUOTE (Harold_Fastwaker @ Apr 5, 2010 - 1:39 AM)

>



Yes it is dirty, yes my garage is messy and no I do not care. Lastly, yes I just took this picture at 1AM.

>

QUOTE (808celica @ Apr 5, 2010 - 1:47 AM)

>MMMMMMmmmm

That's right beeeeeeches take that in and LOVE IT

That is FLUSH, not Hellaflush.

I dislike Hellaflush because large amounts of negative camber look RETARDED, and every fender looks the same because everyone has to roll their fenders. Harold's car looks clean, the stance is excellent, and it's a job well done. I hope to get my wheels flush with the inside edge of my fender and nothing more. I like my bearings, to be honest.

808celica

#49

i didnt say he was HF

hmm i destroy bearings and axles. i think i need to do my 5th set of both within a 2 yr span

---

I don't normally drive fast, but when I do its on a curvy section of this island

Harold_Fastwaker

#50

>

QUOTE (Espo @ Apr 5, 2010 - 1:57 AM)

>That is FLUSH, not Hellaflush.

I dislike Hellaflush because large amounts of negative camber look RETARDED, and every fender looks the same because everyone has to roll their fenders. Harold's car looks clean, the stance is excellent, and it's a job well done. I hope to get my wheels flush with the inside edge of my fender and nothing more. I like my bearings, to be honest.

Don't let the angle deceive you. I am not Hellaflush, never wanted to be, it just not economical in my area for my DD. However, amounts of negative camber are in effect. -1 up front and -3ish in the rear.

I am not a big fan of a huge tire stretch with massive poke, certain cars can pull it off but most look dook.

Next run of wheels I plan to go wider with more poke.

---

:.....Flush Wheel Fitment Guide.....:

Espo

#51

I'm not saying I don't like camber, I have camber from being lowered - I just don't like large amounts of it.
Nor will I be running stretched tires.
Nor poking anything.

devilsden97

#52

love it on old school JDM rides. ****ING HATE HATE HATE it on anything newer then 1985

---

KawiLove

trdproven

#53

i dont mind the flush or HF scene i just think this site don't really have legit wheels like japan name brands, that I would really love. 7th gen folks seem to do it up more than us over here. I plan to get better sized wheels somwhere in the 9 area just to try it out.

---

94 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi||Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto||Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr804 Celica GT|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|89 Supra (Sold)90 Supra (Sold)

czwalga

#54

Stretched tires and lots of negative camber means one thing. Your car is slow as **** and unpractical. Also looks like you're car has cerebral palsy.

---

-93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq-95 Celica GT Rally Car - 3sge/AWD-10 F150Always buying stock wheels... PM me if interested in selling.

djgeo05

#55

I was waiting for new bigger tires to post pictures but this is Before a wash.

New rims, btw.



This post has been edited by djgeo05: Apr 17, 2012 - 9:38 PM

mak5603

#56

LOWAR!

---

2006 BMW 330i - 6 Speed - Dinan Stage 12014 Toyota Rav4 XLE