Over 1M Posts • 84K Topics • 9K Authors

Questions on Lowering springs? - 6G Celicas Forums

Topic #72647 7 posts Started by mgnt232
Ok so i dont know ANY thing about lowering a car, not my forte lol
But I found lowering springs on ebay
Megans- <<-- click link
Or Tein- <<-- click link
But then scrolling down I found more expensive KYB with struts AND springs
KYB- <<←← Click link
I am not really looking for great stability improvement, as I have a 7A-FE lol and I drive safe, I just want to lower her a little
Can I just get the springs, and lower it with my stock struts? Or will I need to get the more expensive things?
Sorry I know this must be somewhere, I cant find it, just neeed a simple explanation.
Also, I know the is contradictory to what I said before but will the Megans or Tein make me handle better?
Are they any good?
THANKS ALOT!!!

This post has been edited by mgnt232: Mar 10, 2010 - 9:32 PM

I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
From what I understand, no expert.

Putting lowering springs on old stocks is just going to blow them, so you need to get new struts either way.

You can get the springs fine on some KYB Gr2, and just get either springs. Can't remember the drop on each, but sure the link tells.

Or coilover sleeves are another option, bouncy though....but work.

This post has been edited by rave2n: Mar 10, 2010 - 8:51 PM
Are these basically what you have?
Link Here Click
How do you like them?

I've spilt my heart into this car :) And I don't ever plan to stop- 6GC for Life ->Semper Fi<1994 Cupra :p 3sgte1995 Celica ST DD1969 Chevelle SSalllll balls. P2 approved!
I have those struts, them seem fine to me, like stock replacement. I use coilsleeves, but not the ones linked below, mine were much cheaper, but I pay for that with bouncy riding, but it doesn't bother me. They stick to the ground good, i'm not a real agressive driver. Got it lower, and tighter on turns, so its works for a DD for me.

http://cgi.ebay.com/ebaymotors/Toyota-Celi...=item23032135a6
>
QUOTE (rave2n @ Mar 11, 2010 - 5:45 PM) *
>I have those struts, them seem fine to me, like stock replacement. I use coilsleeves, but not the ones linked below, mine were much cheaper, but I pay for that with bouncy riding, but it doesn't bother me. They stick to the ground good, i'm not a real agressive driver. Got it lower, and tighter on turns, so its works for a DD for me.

http://cgi.ebay.com/ebaymotors/Toyota-Celi...=item23032135a6



i use gc's too no bounce at all just a rough ride.

you wont need new struts with teins unless you really wanna knock two birds out with one stone.

"she can polish my strut bar anytime As long as her blow-off valve's in good order"
the price of lowering with springs and struts will add up quickly. buy coils... you were looking at those megans.

if you do lower with springs you should get new struts, the spring obviously, and a camber kit.

i'd go coil, but to each his own. with a coil you can adjust ride height and damping; with springs you get whatever they give you.

"Slow your roll"http://www.flickr.com/photos/g_styer/http://www.facebook.com/profile.php?ref=pr...mp;id=601896863
Tein S techs : 1.5 FR 1 R
Tanabe DF210: 2 FR 1.6 R
GF210: 1 FR 0.7 R
NF210: 1.2 FR 1 R
Megan: 1.9 FR 1.7 R
Intrax: 1.8 FR and R
_______________________________________

That's all i can remeber right now

Either way you'll have to replace your shocks sooner or later. Im due for another shock swap soon (1yr and 1/2 since drop)

With your Veliside Rep Kit I would do a healthy Tanabe NF or GF or the max i'd go is the Tein springs

This post has been edited by 808celica: Mar 11, 2010 - 3:19 PM

I don't normally drive fast, but when I do its on a curvy section of this island